Surface Cleanliness Testing Kit

HONJAHAUS134-KITSurface Cleanliness Testing Kit, is a surface pre-treatment testing kit equipped with various testing equipment for detecting the roughness and dirtiness of sandblasted surfaces.

Surface contour

The surface roughness level affects the overall performance of the coating, determining many aspects such as adhesion, coverage, and total amount of coating used. If the roughness is too high, the demand for paint will increase, otherwise the raised points will not be covered by paint, resulting in rust spots. If the roughness value is too low, sufficient adhesion may not be generated.

Dust detection

The dust on the sandblasted surface can reduce the adhesion of the coating, leading to premature abnormalities and non compliant coating layers.

The dust tape set can be used as a record of "pass/fail" or dust test level according to the recommendations of BSENIO8502-3 standard.

To ensure the quality of the coating and achieve the best service life, it is necessary to measure the degree of salt contamination on the surface before implementing the coating.

Salt detection

If coating is applied to surfaces that have been contaminated but not pre treated, it can lead to premature coating damage and increase rework and maintenance costs.HONJAHAUS134-KITSurface Cleanliness Testing KitLightweight and portable, the instrument can detect the conductivity of a drop of sample and automatically convert it into salt content, allowing users to work according to IS08502-6 or IS08502-9 without manual calculation.