- Phone
-
Address
4105, 41st Floor, NEO-B Building, Chegongmiao Green View, 6011 Shennan Avenue, Futian District, Shenzhen, Guangdong Province
Product Categories
Shenzhen Fuanda Intelligent Technology Co., Ltd
Sulfur hexafluoride gas leakage monitoring sensor/power plant/GIS
NegotiableUpdate on 05/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The C-series diffuse infrared gas sensor uses the principle of infrared spectral absorption (NDIR) to detect the specific gas content in the gas as an infrared gas n-body sensor. This sensor adopts imported high-precision infrared emission detectors and industrial grade high stability microcontrollers. Its products have the characteristics of long service life, low cost, high precision, and good long-term stability. The default baud rate for TTL232 level serial communication is 9600, with 8 data bits, 1 stop bit, and $r $n even parity; Its output interface is: TTL232 level digital output signal, 0.4-2V voltage output signal.
Product Details
CThe series of diffuse infrared gas sensors adopt the principle of infrared spectral absorption method（NDIR）Detect the specific gas content in the gas using infrared gas
Body sensor. This sensor adopts imported high-precision infrared emission detectors and industrial grade high stability microcontrollers, which have long service life, low cost
High precision and good long-term stability.TTL232The default baud rate for level serial communication is 9600The data bit is 8Position,1Stop position,
Occasional verification; Its output interface is:TTL232Level digital output signal,0. 4~2V Voltage output signal.
Product application:
It can be widely installed in home networks, ventilation systems, industrial controllers, public wall mounted use, pipeline gas detection, environmental monitoring, etc.
3、 Performance parameters:
1、 Test environment: Atmospheric pressure:1020 hpa temperature25℃ Gas flow rate:500ml / mi n
2、 Gas detection: in gasCO2Gas content;
3、 Working Principle:NDIR
4、 Preheating time:<2 minute; （20Best Measurement State per Minute
5、 Response time:<5Seconds;
6TheT90：
15second( 500ml /Mi n)
7、 Recovery time: 25Seconds;
8、 Measure flow rate:300--500 mL/Min
9、 Resolution: The visual range varies
10Repeatability: ≤±1% FS
11Linear error:≤±1% FS
12Zero temperature drift:≤±0.1% FS/℃
13Range temperature drift:≤±0.2% FS/℃
14Working voltage: 5.5 VDC
15Working current: Maximum current 120mA
average current 60 mA
16Working power: <600 mW
17Output signal: 0.4- 2V
voltage type
numeric
TTL232
18Working temperature:- 10℃- - 50/℃
19Storage temperature:- 20℃- - 60/℃
20Working humidity:0--95%RH (No condensation)
21Work pressure:1±0.2 One atmospheric pressure
22External dimensions: diameter29mm *tall84mm(Excluding pin height).
Similar Product Recommend
