Structural diagram of Yinshun brand high-voltage mining rubber sheathed flexible cable

Structural diagram of Yinshun brand high-voltage mining rubber sheathed flexible cablecharacteristic

1. Use softer small-diameter copper single wires, bundled and twisted at small intervals. The bending and twisting properties of the entire cable are also affected by the insulation and sheath structure, so it cannot be assumed that the finer the single wire, the smaller the pitch, the better.

2. Adopting co directional bundle twisting and compound twisting can improve flexibility.

3. In order to facilitate the relative sliding of wires in the insulation layer and facilitate installation and maintenance. The single wire of drill cables and small section mining machine cables should be tinned, and the large section mining machine cables should be insulated with paper tape outside the wire.

2： The insulation layer requires sufficient electrical insulation performance

1. Use rubber with a rubber content of not less than 35%

2. The insulation thickness is thicker than that of general rubber sheathed cables

3. Use rubber with good electrical properties and adopt good extrusion technology (such as extrusion vulcanization continuous production line)

3： Structural diagram of laminated silver Shun brand high-voltage mining rubber sheathed flexible cable

The use of semiconducting rubber as a layer should ensure that its transition resistance meets the standard requirements to ensure reliable operation of the relay protection system in case of accidents.

4： Pad core

1. The pad core should fully serve as a buffer when the cable is subjected to impact or compression, while not being too large in outer diameter. Require a reasonable design to fill the gaps between insulated core wires.

2. The mechanical performance should not be lower than the requirements of the insulating rubber

Mining mobile rubber sheathed cable

(MY) UY-0.38/0.66: Mining mobile rubber sheathed flexible cable, power connection for various underground mobile mining equipment with rated voltage of 0.38/0.66KV for coal mines

(MYP) UYP-0.38/0.66: Mining mobile rubber sheathed flexible cable, power connection for various underground mobile mining equipment with rated voltage of 0.38/0.66KV for coal mines

(MYP) UYP-0.66/1.14: Mining mobile rubber soft sheathed cable, power connection for various underground mobile mining equipment with a rated voltage of 0.66/1.14KV for coal mines

(MYQ) UYQ-0.3/0.5: Mining lightweight mobile rubber sheathed flexible cable, power connection for various underground mobile mining equipment with rated voltage of 0.3/0.5KV for coal mines

(MYPTJ) UYPTJ-3.6/6: Mining mobile shielded monitoring type rubber sheathed flexible cable, rated voltage 3.6/6KV underground mobile transformer and similar equipment connection line for coal mines

(MYP) UYP-3.6/6: Mobile shielded rubber sheathed flexible cable for mining, rated voltage 3.6/6KV for power connection of mobile ground mining machinery used in coal mines

(MYPT) UYPT-3.6/6: Mobile metal shielded rubber sheathed flexible cable for mining, power connection for mobile ground mining machinery with rated voltage of 3.6/6KV for coal mines

(MYPD) UYPD-3.6/6: Mobile shielded rubber sheathed flexible cable for mining, power connection for mobile ground mining machinery with rated voltage of 3.6/6KV for coal mines

MYP）UYP-3.6/6

Mining mobile shielded flexible cable

The connection between a mobile ground mine with a rated voltage of 3.6/6KV and a mechanical power supply has a lower ambient temperature limit of -20 ℃

（MYPT）UYPT-3.6/6

Mining mobile metal shielded rubber sheathed flexible cable

MYPTJ-3.6/6

Mining mobile shielding monitoring flexible cable

Rated voltage 3.6/6KV coal mining machine cable power cable, used for power connection

MYPTJ-6/10

Mining mobile metal shielded flexible cable

MYPTJ-8.7/10 Mobile metal shielded monitoring rubber sheathed flexible cable for coal mines

Power connection for underground mobile transformers and similar equipment with a rated voltage of 8.7/10KV

1. Sign a product quality assurance certificate and promise that unqualified products will never leave the factory.

2. Provide product quality tracking services within two years and keep customer service records in archives for 20 years.

3. Due to product quality issues, our company will provide warranty, return, replacement, and meet customer requirements.

Tianjin Cable Factory Rubber Cable FactoryFactory Manager: Hao Guozheng Sales Department General Manager: Hao Guoqing
：
/
Mining control cable, mining signal cable, mining communication cable
General rubber sheathed cable, mining rubber sheathed cable, urban communication cable
Computer Cable Coaxial Cable
Address: Liuyanma Industrial Zone, Dacheng County, Hebei Province
Organizational Code Certificate: 10951028-2
CCC certification number: 2003010105099692
Business License Registration Number: 13102510000860
Remittance account: 91608 04002 01100 05316
Bank of Deposit: Liuguxian Rural Credit Cooperative in Dacheng County, Hebei Province