Storage of drying box, electronic moisture-proof box, and dehumidification cabinet

Storage of drying box, electronic moisture-proof box, and dehumidification cabinet：

Product response parameters

Product Parameters:

1: The moisture-proof box body is made of 1.2mm high-quality steel plate, reinforced structure, and overlapping design. Has good load-bearing and sealing properties.

2: The inner and outer surfaces of the moisture-proof box cabinet have been treated with spray coating (baking paint), which is corrosion-resistant, scratch resistant, and aesthetically pleasing. The anti-static configuration (black) model has an electrostatic resistance value of 10 ^ 6 ^ -10 ^ 9 ohms, which meets the ESD industry standard. Ensure that stored electronic products are not damaged by static electricity.

3: Equipped with high load-bearing partitions with uniform small holes on the surface for easy air circulation. Make the dehumidification effect more uniform. The position of the partition can be adjusted according to the actual usage space.

4: For the convenience of viewing the situation inside the box and retrieving items, the electronic moisture-proof box is designed with an observation window and a high-strength tempered glass door design. Each door is equipped with a flat pressure lock, which is not only beautiful but also has anti-theft function. The bottom is equipped with movable brake casters for easy movement and fixation, and can also be optionally equipped with high load-bearing support.

5: The moisture-proof box is designed with a super high brightness dual digital display on the upper right, displaying temperature and humidity. The temperature and humidity are displayed independently, and the temperature and humidity sensor adopts *, which has a long service life, small offset, and counting reference. The humidity can be set and has a memory function, so there is no need to set it again after power failure.

6: The humidity display range is 0% to 99% RH, and the temperature display range is -9 ℃ to 99 ℃. Display accuracy: humidity ± 3% RH; temperature ± 1 ℃.

7: The moisture absorbing movement is encapsulated with high-temperature flame-retardant materials to eliminate safety hazards. The movement is made of imported moisture absorbing material that absorbs moisture, with strong moisture absorption effect. It is 15 years old and environmentally friendly. Built in intelligent microcomputer system, automatically identifies working time and power, reduces energy consumption, saves energy without dripping water, and has no noise. The moisture absorbing core can still continue physical dehumidification after power failure, and the humidity should not increase by more than 10% within 24 hours.

Accessories: USB computer interface type moisture-proof box

Equipped with temperature and humidity reading software

*Direct reading: Connect the computer to the electronic moisture-proof box through a USB cable, and use software to synchronously read the temperature and humidity curves inside the box. Can effectively monitor changes in humidity inside the box.

*Reading records: Connect the computer to the electronic moisture-proof box through a USB cable, and use software to read the temperature and humidity change curves inside the box over the past few days, replacing manual recording.

*Accurate: There are no errors or inaccuracies in manual recording, and scientific and intelligent management helps to control humidity more efficiently.

*Economy: Equipped with temperature and humidity reading software, customers do not need to purchase an additional temperature and humidity recorder. This product can simultaneously record temperature and humidity, and can be used for long-term recording without the need for consumables.

Suzhou Sanqing Instrument Co., Ltd. supplies testing equipment and environmental equipment. Accepting various non-standard customized products.

Electronic moisture-proof boxes are applied in various industries

Semiconductor/Electronic Industry Applications

*IC micro cracking process during SMT heating process

*Put the unpacked but unused IC parts, BGA or PCB into an ultra-low humidity and moisture-proof box

*Place the parts that have not been soldered in the tin furnace in a moisture-proof box in the temporary storage area

*After baking, the parts to be warmed up should be placed in an ultra-low humidity electronic moisture-proof box

*Put the finished product in an ultra-low humidity moisture-proof box before packaging

Defense industry, automotive industry, food industry, pharmaceutical industry, plastic processing industry, aerospace industry, photography, optics, fixed applications, moisture-proof boxes; drying oven