100 level clean oven liner made of Teflon

100 level clean oven liner made of TeflonproductCharacteristic introduction:

The oven is assembled from a box body, an electrical control cabinet, an electric heating section, an air duct section, a dust filtration section, an N2 intake and exhaust section, etc. It has a reasonable structure and practical functions.

Outer box material: The outer box is made of SS41 # medium carbon steel plate treated with phosphate film salt and coated with two layers of anti gloss paint to prevent dust.

Inner container material: The inner box is made of imported SUS304 # 2mm stainless steel plate welded with argon all around, and cleaned with alkaline soda water to effectively prevent the generation of dust on the machine itself.

Thermal insulation material: filled with 100K grade high-density insulation board produced by Zhongchang Glass Fiber Company, effectively preventing heat energy waste.

Electric heating part: using imported SHEATHED HEATER dust-free and oxidation free electric heating generator.

Air duct section: The overall structure adopts a horizontal air supply method, which blows air from left to right and then passes through the H.E.P.A imported from the United States (special air duct design). The filtration effect can reach 99.99%, Class100.

Exhaust and intake: The exhaust port adopts an automatic damper design to achieve strong circulation effect and rapid cooling. An N2 flowmeter is attached to the intake port to control the intake volume. The oxygen content at the intake port of 10mm can reach below 40PPM.

100 level clean oven liner made of Teflon Product specification reference selection:

Temperature control device: Fuji PXF series temperature controller imported from Japan, with built-in PID automatic tuning and slope setting function.

The control system adopts the FX5U series from Mitsubishi Corporation of Japan, which comes with a TCP-IP network port and can be remotely controlled by connecting to the fieldbus.

The temperature control method is SSR solid-state relay power adjustment output, and the temperature acquisition probe is a specially armored K-type thermocouple.

Temperature monitoring device: Using a Japanese Yokogawa six channel patrol detection paper recorder, it can detect and print the real-time ambient temperature inside the oven.

The operation control system adopts the FX-3G series programmable controller from MITSUBISHI company in Japan, which makes programmatic operation more reliable and efficient.

The oxygen content analysis system adopts the Japanese TORAY RF-400 series oxygen content analyzer, which can monitor the oxygen content inside the box in real time. (The domestic brand is Shanghai Yingsheng Instrument, the difference is that the start-up time for domestic products is about 15 minutes, while the start-up time for imported products is about 5 minutes.).

Protective measures: Over temperature protection, wire breakage alarm, phase sequence protection, overload protection, short circuit protection, leakage protection, and electromagnetic access control protection.

Equipment usage conditions:

Environmental conditions: Temperature between 5-40 ℃: Humidity ≤ 85% R.H.

Power supply: 3P AC380V, 50HZ.

Usage environment: No strong vibration, no strong magnetic field influence, no corrosive gas.

Air pressure: 200~500kpa.

Installation and usage environment: There should be a 500mm space around the box for product installation and maintenance.

Suzhou Sanqing Instrument Co., Ltd. accepts non-standard customization of oven, dust-free, clean oven and other products.

100 level clean oven liner made of TeflonTo prevent metal friction on the surface of the material caused by product friction, and to prevent particle formation from contact between material components and the metal surface of the inner liner, PTFE protection is required for the inner liner.