Static pressure liquid level transmitter

　　Static pressure liquid level transmitterProduct features:
1. Adopting circuit processing technology, with stable performance and high sensitivity;
2. Multiple measuring ranges, capable of measuring up to 200m (water column pressure);
3. Adopting 316L stainless steel isolation membrane, suitable for various measurement media;
4. Flexible configuration, different configurations can be selected according to needs;
5. Integrated or split type options are available;
6. Reverse polarity and overvoltage protection;
7. Anti impact and lightning protection design;
8. Laser resistance temperature compensation, zero point and range can be adjusted on site;
9. Wide range, corrosion-resistant, suitable for multi pass media;
10. Strong overload and anti-interference ability, stable performance;
Product Introduction:
Using high-performance diffused silicon pressure sensors as measuring elements, the liquid level transmitter converts the gauge pressure or absolute pressure of the measured medium into standard voltage or current signals through highly reliable amplification processing circuits and precise temperature compensation. The liquid level transmitter is compact in size and easy to use and install. It can be directly immersed in water to measure the liquid level height from the end of the transmitter to the liquid level.
Product Usage
Liquid level transmitter for industrial field liquid level measurement and control, urban water supply and sewage treatment, petroleum, chemical, power plant, hydrological monitoring, reservoir, dam, hydropower construction and other fields of liquid level measurement and control.

　　Static pressure liquid level transmitterTechnical parameters:
1. Measurement form and range: 0-1-200mH2O;
2. Allowable overload: 2 times the full range pressure;
3. Working temperature: -20~80 ℃, temperature compensation: -10~70 ℃, storage temperature: -40~80 ℃;
4. Accuracy: 0.25% FS (typical) 0.5% FS (large);
5. Stability will not occur: 0.25% FS (typical), 0.5% FS (large);
6. Temperature drift coefficient: 0.01% FS (typical, range not less than 5mH2O) 0.03% FS (typical, range less than 5mH2O);
7. Output signal: (4-20) mA (two/three wire system) （0～10/20）mA、（0～5）V、（1-5）V、（0～10）V；
8. Power supply: 15-36VDC (calibrated voltage 24VDC);
9. Load (W): Current output type<(U-15V)/0.02A, current output type>5K;
10. Shell material: alloy aluminum;
11. Diaphragm: 316L stainless steel;
12. Cable: Waterproof and breathable cable;
13. Mechanical protection: IP68 (pressure sensor part), IP65 (junction box transmitter part);