-
E-mail
info@conasen.com
- Phone
-
Address
2-1702, Beichen New Era Building, No. 13 Beiyuan Road, Chaoyang District, Beijing
Product Categories
Beijing Kangansen Instrument Technology Co., Ltd
Stainless steel float level switch SWITCH-TEK series LV35/LV36
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
● Adopting 316 SS material liquid level sensor, suitable for high temperature and high pressure occasions ● Dry contact reed switch, can be selected as normally open or normally closed through float installation position ● Providing vertical installation for high or low liquid level detection
Product Details
Product Introduction
The SWITCH-TEK series LV35/LV36 stainless steel float level switch from Flowline in the United States provides vertical installation and uses one 30VA or 100VA reed switch output, which can reliably detect the liquid level of relatively clean water, diluted chemicals, and light oil. Applicable media include deionized hot water and edible oil. Stainless steel level sensors can be installed vertically inside the storage tank or horizontally on the tank wall for high or low level alarms.
Technical Specifications
Installation position: Vertical installation ± 20 °
Accuracy: ± 3mm (in water)
Repeatability: ± 1mm (in water)
Specific gravity: minimum 0.7
Contact type: (1) SPST spring
Contact capacity: 30VA-100VA
Contact output: normally open (NO) or normally closed (NC) optional
Working temperature: -40 ℃ to 200 ℃
Pressure: Maximum 34.5ba
Protection level: NEMA 6 (IP68)
Sensor material: 316SS
Cable sheath: rubber and plastic
Cable type: 2-core
Cable length: 2 "(61cm)
Installation interface: 1/8 "NPT and 1/4" NPT
Grade: Universal Type
Certification: CE
Similar Product Recommend
