Stainless steel 304 laboratory chemical rotary granulator

Stainless steel 304 laboratory chemical rotary granulatorAll parts in contact with the material are made of stainless steel. Suitable for industries such as pharmaceuticals, food, chemicals, and light industry, it can be used to grind wet powders into the required particles, and can also be used to grind dry powder that has been pressed into blocks into particles. This machine is easy to operate, easy to maintain, easy to clean, and has automatic discharge. And different aperture sieve tubes can be selected according to user needs. The parts in contact with the material are made of stainless steel material, which can ensure the material itself without deterioration.

Stainless steel 304 laboratory chemical rotary granulatorAll made of stainless steel, the wet powder is crushed into the required particles, and the raw material powder is directly compressed, formed, crushed, and granulated through mechanical extrusion in a granulation process. The size of granulation depends on the thickness of the replacement sieve, and the materials produced are particles of different sizes! Easy to operate. The granular medicine processed by the dry granulation machine has been improved in appearance and is also convenient for storage and transportation.

Rotary granulatorMaintenance Method：

1. Regularly inspect the machine parts, once or twice a month, to check whether the moving parts such as worm gears, worm gears, and bearings are flexible and worn. If any defects are found, they should be repaired in a timely manner and not continue to be used. To avoid causing adverse situations.

2. The wet granulation machine should be placed indoors in a dry and clean environment, and the atmosphere should not contain acids or other corrosive gases that can flow through the machine parts.

3. After a single use or shutdown of the wet granulation machine, the rotating drum should be removed for cleaning and brushing the remaining powder in the hopper, and then installed properly to prepare for the next use.

4. If the machine is not in use for a long time, it is necessary to wipe the whole body clean, apply anti rust oil to the smooth surface of the parts, and cover them with a cloth.