Measurement range

103～1013(Ω)

Measurement mode

①Standard measurement mode
(Ohm per square, Surface Resistivity)
②Resistance measurement mode between electrostatic pad and grounding terminal
(Ohms, Resistivity to Ground)
Use of accessory parts

③ Resistance testing mode of IEC specifications

IEC's standard measurement mode for electrical contact area and weight

LCD display

Index representation (displayed to one decimal place)
Test shows countdown time display

Residual voltage display

LED display

①TEST
Green LED light: standard measurement mode
(Ohm per square, Surface Resistivity)
Red LED light: Resistance measurement mode between electrostatic pad and ground terminal

(Ohms, Resistivity to Ground)
IECResistance testing mode display of specifications
②Voltage measurement display (10V, 100V)
Green LED light: 10V output
Red LED light: 100V output
Yellow LED light: Measurement completed

③CHARGE
Red LED light: displays battery charging

measurement time

15s,30s,60s

Scope setting

Corresponding testing range can be set (0.5 per square meter can be set)

Measurement accuracy

Index representation value ± 0.5 (index) (e.g. 108.5 0.5)

Measure voltage

Automatic voltage switching mode
①103-106:10V,10mA max
②106-1013: 100V,1mA max

power supply

Built in battery system

External Link Terminal

①External electrical connector
② AC connector (battery charger) {US/B connection wire}

Measure area

50mm (electrical length) x 50mm (electrical spacing) (surface resistance measurement value)

Electrical material

Special conductive rubber (with a volume resistance of 0.02 Ω· cm MAX.)

Measurement environment

15℃～25℃,60% R.H. 以下

body size

114(W)×78(D)×69(H) MAX.(mm)

Shell material

stainless steel

weight

The main body weighs about 700g, and the accessories weigh about 25g