Sponge compression deformation tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Sponge compression deformation tester test method: Take a standard test piece, clamp it between the flat plates of the device, and when the screw is rotated, compress it to a certain ratio. Then put it in an oven with a certain humidity (purchased separately), take it out after the specified time, remove the test piece and cool it for 30 minutes, measure its thickness, and substitute it into the formula to calculate its compression deflection.

Product Details

1、 Product Name: Sponge Compression Deformation Tester

2、 Product model:HT-1032

3、 ProductPurpose and specifications：

1. Product Usage: Sponge Compression Deformation TesterTake a standard test piece and clamp it between the flat plates of the device. When rotating with screws, compress it to a certain ratio and then place it in an oven with a certain humidity (purchased separately). After the specified time, remove the test piece and cool it for 30 minutes. Measure its thickness and substitute it into the formula to calculate its compression deviation.

2Compliant with standards:GBT6669-2008 ASTM-D395，GB-7759，JIS-K6262

3. Specification parameters:

Sample specifications: length 50mm x width 50mm x D25mm

Compression ratio: 50% (thickness of annular limiter: 12.5mm)

75% (thickness of annular limiter: 6.25mm)

90% (thickness of annular limiter: 2 25mm）

Volume: Approximately 20 × 12 × 10cm

Weight: Approximately 10kg

material Quality:304 # stainless steel