Split type turbine flowmeter

NegotiableUpdate on 05/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ZY-LWGY-F turbine flow sensor is paired with a display instrument to form a turbine flow meter. Sensors have the characteristics of high accuracy, good repeatability, long lifespan, and simple operation. Can be widely used in industries such as petroleum, chemical, metallurgy, and papermaking to measure the instantaneous volume of liquids

Product Details

ZY-LWGY-FTurbine FlowmeterA new intelligent instrument integrating turbine flow sensor and display integration developed using advanced ultra-low power single-chip microcomputer technology, with dual row LCD on-site display, has obvious advantages such as compact structure, intuitive and clear reading, high reliability, no external power interference, lightning resistance, and low cost. The instrument has three-point correction of instrument coefficient, intelligent compensation of instrument coefficient nonlinearity, and can be corrected on site. The high-definition LCD display simultaneously displays instantaneous flow rate (4 significant digits) and cumulative flow rate (8 significant digits, with reset function). Keep all valid data intact for 10 years after power failure. This type of turbine flowmeter is an explosion-proof product with an explosion-proof rating of ExdIIBT6.
This categoryTurbine FlowmeterAccording to the power supply method and whether it has remote signal output, it can be divided intoZY-LWGY-F-Type B andZY-LWGY-F-Type C.
ZY-LWGY-F-Type B: The power supply uses a 3.2V10AH lithium battery (which can operate continuously for more than 4 years); No signal output function.
ZY-LWGY-F-Type C: The power supply adopts 24VDC external power supply, outputs 4-20mA standard two-wire current signal, and can add RS485 or HART communication according to different on-site needs.

model								explain
ZYLWGY-F-	□	/□	/□	/□	/□	/□	/□	explain
state-owned call open up or clear out by poking or jabbing footpath	4							4mm， Standard range 0.04-0.25m³/h， Wide range of 0.04 to 0.4m³/h
	6							6mm， Standard range 0.1-0.6m³/h， The width of the measuring wheel is 0.06-0.6m³/h
	10							10mm， Standard range 0.2-1.2m³/h， Wide range of 0.15-1.5m³/h
	15							15mm， Standard range 0.6-6m³/The wide range of h is 0.4-8m³/h
	20							20mm， Standard range 0.8-8m³/h， Wide range of 0.4-8m³/h
	25							25mm， Standard range 1-10m³/h， Wide range of 0.5-10m³/h
	32							32mm， Standard range 1.5-15m³/h， Wide range of 0.8-15m³/h
	40							40mm， Standard range 2-20m³/h， Wide range of 1-20m³/h
	50							50mm， Standard range of 4-40m³/h， Wide range of 2-40m³/h
	65							65mm， Standard range 7-70m³/h， Wide range of 4-70m³/h
	80							80mm， Standard range 10-100m³/h， Wide range of 5-100m³/h
	100							100mm， Standard range of 20-200m³/h， Wide range of 10-200m³/h
	125							125mm， Standard range 25-250m³/h， Wide range of 13-250m³/h
	150							150mm， Standard range: 30-300m³/h， Wide range of 15-300m³/h
	200							200mm， Standard range 80-800m³/h， Wide range of 40-800m³/h
Type		N						Basic type,+12V power supply, pulse output, high level ≥ 8V, low level ≤ 0.8V
		A						4-20mA two-wire current output, remote transmission type
		B						Battery powered on-site display type
		C						On site display: 4-20mA two-wire current output
		C1						On site display/RS485 communication protocol
		C2						On site display/ART communication protocol
accuracy class			05					Accuracy level 0.5
accuracy class			10					Accuracy level 1.0
Turbine Type				W				Wide range turbine
Turbine Type				S				Standard turbine
texture of material					S			304 stainless steel
texture of material					L			316 (L) stainless steel
Explosion proof								Unmarked, non explosion proof type
Explosion proof						E		Explosion proof type (Exm Ⅱ CT6 or Exd Ⅱ BT6)
pressure rating							N	Conventional (refer to Table 2)
pressure rating							H(x)	High voltage (refer to Table 2)

Note: DN15 to DN40 are usually threaded connections. If you wish to use flange connections, please add "(FL)" after "nominal diameter"
For example, selecting a flange connected explosion-proof typeTurbine FlowmeterMeasuring diesel, the pipeline is DN40, on-site display and remote transmission of current signals are required, with an accuracy of 0.5 level, 304 stainless steel material, instrument pressure resistance of 16MPa, and a measurement range of standard range. The product model should be LWGY-40 (FL)/C/05/S/E/H16