- Phone
-
Address
No. 25, Lane 66, Xinyuan Road, Jiading District, Shanghai
Product Categories
Shanghai Daishuo Electronic Technology Co., Ltd
Spain JBC CD-2BHQF streamlined welding table CDB
NegotiableUpdate on 05/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Spanish JBC CD-2BHQF simplified welding station CDB $r $n is suitable for welding operations in ordinary electronic applications. This welding station has all the advantages of the JBC efficient welding system: JBC intelligent thermal management provides welding quality, and sleep mode and hibernation mode extend the service life of the welding nozzle by 5 times. $r $n Complete nozzle cleaning system, equipped with a dedicated fast and safe soldering iron tip replacement seat.
Product Details
Spain JBC CD-2BHQF streamlined welding table CDB
Suitable for welding operations in ordinary electronic applications.
This welding station has all the advantages of the JBC efficient welding system:
JBC intelligent thermal management can provide welding quality, and sleep mode and hibernation mode extend the service life of the welding nozzle by 5 times.
A complete nozzle cleaning system, equipped with a dedicated fast and safe soldering iron tip replacement seat.
Technical Specifications
Earthing fuse:
F 1.25A
Anti static:
Meet ANSI/ESD S20.20-2021
FAE / Robot connector:
Remote control or FAE Fume Extractor connection
Idle temperature Stability (still air):
±1.5 ºC / ±3 ºF (Meets and exceed IPC J-STD-001)
Rated power
175W
Peak power:
130W
Temperature accuracy:
±3 % (Using reference cartridge)
Temp. adjustment:
±50 ºC / ±90 ºF (Through station menu setting)
Resistance between welding nozzle and ground:
<2 ohms
Voltage between welding nozzle and ground:
<2 mV RMS
Temperature optional range:
90 - 450 °C
USB-B (rear):
PC communications
Package:
234 x 234 x 258 mm / 3.34 kg.
Spain JBC CD-2BHQF streamlined welding table CDB
Factors limiting the lifespan of welding tips
Welding operation temperature
The higher the welding temperature, the more likely it is to cause oxidation and corrosion of the welding nozzle. Please choose a soldering nozzle with a larger contact surface with the device to be soldered, and maintain low temperature as much as possible to complete the soldering operation. Tools with good heat resistance and keep the welding nozzle clean and free of oxidation.
Correct operating method
Excessive force can cause damage to components and solder joints. Do not use the welding nozzle as a screwdriver or sharp object to touch any object. Please choose the appropriate welding nozzle and welding temperature according to the situation of the welding operation.
Thickness of plating layer
Corrosion or wear of the soldering nozzle can shorten the lifespan of the soldering iron tip. Do not use any mechanical or chemical methods to clean the welding nozzle. Please use the cleaning methods provided by the original factory, such as brass wire cleaning balls, automatic welding nozzle cleaning machines, or sponges.
Welding nozzle oxidation
After oxidation, the thermal conductivity of the solder nozzle decreases and it is not easy to eat tin. The higher the temperature of the welding nozzle, the higher the probability of oxidation. To avoid oxidation of the soldering nozzle, please keep it in the soldered state when not in use and use the sleep and sleep mode settings of the JBC soldering station.
Flux and solder alloys
Excessive use of soldering flux during the welding process can cause corrosion of the soldered components. IPC recommends flux labeling that complies with ROL, REL, and ORL. The flux content of small-diameter tin wire may be insufficient, so please use flux if necessary.
Similar Product Recommend
