SolarLight solar simulator

SolarLight solar simulatorThe LS1000 and 16S series can generate solar ultraviolet radiation with a wavelength range of 290-400nm. Users can quickly configure them into multiple output modes: UVA, UVB, UVA+B, or choose full spectrum solar output according to their needs without complex operations. These high-precision research grade instruments are designed specifically for the "pre exposure step" in vitro broad-spectrum sunscreen testing, in compliance with FDA and ISO requirements.

The product is equipped with all the necessary equipment for real-time testing upon leaving the factory, and can be used immediately upon opening the box. This includes: solar simulator, dose controller/radiometer, NIST traceable erythema sensor and UVA sensor, molded or sandblasted PMMA board, and all related accessories!

LS1000 series

·The beam uniformity is greater than 95%, and the uniformity of the effective area at the center of the beam can reach 98%

·Provide square beam, 4-inch (10 cm) and 6-inch (15 cm) single port output

·The 4-inch square spot model can pre irradiate up to 4 PMMA plates simultaneously in about 23 minutes

·The 6-inch square spot model can pre irradiate up to 9 PMMA plates simultaneously in about 23 minutes

·Collimated output, with a working distance of up to 14 inches (35.5 centimeters)

16S series

·The uniformity of the effective area of the beam is greater than 90%

·Provide circular beam, 3-inch (7.5cm) single port output

·It takes about 23 minutes to complete the irradiation of one PMMA board

·Focused output, with a working distance of up to 18 inches (46 centimeters)

SolarLight solar simulatorLS1000 and 16S series - Product advantages:

·Standard and customized simulators: both validated and compliant with FDA, ISO, and COLIPA standards

·Compliant with CE standards

·Equipped with a complete set of testing components, including dose controller/radiometer, NIST traceable erythema sensor and UVA sensor, molded or sandblasted PMMA board, and all related accessories required for real-time testing

·The temperature rise of the irradiated PMMA board is less than 0.2 ℃

·Provide customized spectra

·Equipped with high-performance fused silica optical elements

·Excellent long-term stability

·The strength and uniformity measurement system is easy to operate

·Equipped with an automatic shutter with remote control connection function

·Equipped with an adjustable output high-efficiency switching power supply to match different lamp powers

·Optional AM0/AM1.5 spectrum (250-2500nm)

·Optional function to output only visible light

·Optional light attenuation screen

Optional verification service