Soft water resin cation exchange resin supplier

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The soft water resin cation exchange resin supplier $r $n ion exchange tree fat contains a certain amount of water, and this water should be kept as much as possible during transportation and storage. If the resin loses water during storage, it should be soaked in concentrated saline water (-10%) first, and then gradually diluted. It should not be directly placed in water to avoid rapid expansion and breakage of the resin. In long-term storage, strong type resins should be transformed into salt type, while weak type resins can be transformed into corresponding hydrogen type or free base type or salt type, and then soaked in clean water. During storage or transportation, the resin should be kept in a temperature environment of 5-40C to avoid overcooling or overheating, which may affect its performance

Product Details

Soft water resin cation exchange resin supplier
The steps in the pretreatment method for anion resin are the same as those in the pretreatment method for cation resin; Then soak in 5% HCl for 4-8 hours, drain the acid solution, and wash with water until neutral; Then soak in a 2% -4% NaOH solution for 4-8 hours, drain the alkaline solution, and wash with clean water until neutral for later use

Soft water resin cation exchange resin supplier
The use is fast and efficient, and the required processing time is shortened.

The flow direction of raw water through the exchange layer is the same as that of the regeneration solution.
Macroporous resin has multiple advantages, including swelling resistance, resistance to fragmentation, oxidation resistance, wear resistance, heat and temperature resistance, as well as easy adsorption and exchange of organic macromolecules.

Therefore, when the regeneration solution passes through the exchange layer, the first contact is with the upper part of the exchange layer, which is ineffective and contains ions replaced by the upper exchange layer.
Due to the different types of resins, the parts used in the processing of fiberglass storage tanks are also different. Therefore, manufacturers must pay attention to the use of resins when selecting resins. The production process of acrylic resin products involves multiple links, mainly including free radical polymerization mechanism, formulation and process research and development, control of synthetic raw materials (acrylic monomers, solvents, initiators, additives, etc.), resin equipment and process conditions, measuring instruments, manufacturing operations, intermediate control, quality inspection, packaging, etc. In other words, in the manufacturing of resin equipment.

It affects the retention of the lower part of the exchange layer (the ratio of regenerated ions in the ion exchanger layer to the total exchange capacity).