- Phone
-
Address
508, Building A, Incubator No.1, Innovation Valley, Changqing District, Jinan City
Product Categories
Shandong Snow Electronics Co., Ltd
Snow gas detector with sound and light alarm on-site display
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The GTYQ-SNT200 series gas detector is a high-tech product developed by our company. It uses a highly integrated microcontroller as the control and management core and imported sensors as gas sensing components. A gas monitoring instrument with on-site display function, suitable for hazardous areas with combustible gases, capable of continuously detecting the content of the measured gas in the air for a long time. This instrument can be widely used in various fields where combustible gases exist, such as artificial gas, electricity, petroleum, chemical, metallurgy, steel, coking, biomedicine, and water treatment. It is an ideal monitoring instrument to ensure personal and property safety..
Product Details
Combustible gas detector, liquefied gas leakage alarm deviceworking principle
The detector is mainly composed of sensors, integrated circuits, operational amplification circuits, analog voltage to standard current conversion, etc. The sensor converts the gas concentration into an analog electrical signal, which is then converted into a 4-20mA standard signal or RS485 signal and switch signal output through an integrated operational amplifier circuit and simulated voltage, and uploaded to the gas alarm controller or DCS system.
Combustible gas detector, liquefied gas leakage alarm deviceMain technical indicators
1. Detection principle: catalytic combustion type, electrochemical type
2. Gas detection, measurement range, alarm points: see label
3. Indication error: ± 5% F · S
4. Response time: less than 30 seconds
5. Power supply: DC24V
6. Power consumption: 1.2W
7. Environment: Combustible gas temperature: -40 ℃ -70 ℃ Toxic gas -20-50 ℃ Humidity: ≤ 95% RH
8. Atmospheric pressure: 86KPa -106KPa
9. Insulation resistance: ≥ 100M Ω in normal environment
When the humidity is 94% RH, ≥ 1M Ω
10. Working mode: continuous
11. Explosion proof method: Explosion proof type
12. Sampling method: diffusion
13. Explosion proof grade: ExdIICT6
14. Sensor lifespan: 3 years for catalytic combustion and 2 years for electrochemical combustion
15. Signal output: 4-20mA or switch quantity
16. Three wire system (split line) transmission distance:
Transmission distance<300m (three core shielded wire diameter ≥ 0.5mm2)
Transmission distance ≥ 300m (three core shielded wire diameter ≥ 1.5mm2)<1000m
17. The transmission distance of RS485 bus shall not exceed 1200 meters (two core shielded twisted pair cable, wire diameter ≥ 0.75mm2)
Similar Product Recommend
