Snijders Labs Plant Incubator/Light Culture

Snijders Labs Plant Incubator/Light CultureProduct Description:

Characteristics:

Wide temperature range, from -5 ° C to+50 ° C

Capacity: 432L, Floor Area: 0.77 square meters

Thanks to 5 height adjustable shelves, the growth area is not less than 1.8 square meters

The diurnal cycle of temperature and light can be adjusted

Solid cabinet with scratch resistant coating on the exterior and solid steel frame

Stainless steel panel with grid, painted white to achieve light diffusion

Vertical lighting devices are installed on both sides of the box body

Cable entrance

Equipped with heavy-duty casters, including 2 with brakes for easy mobility

No potential (voltage) contact

Accurate and reproducible results

How to control?

The controller is easy to program and the digital readings are also easy to read. The lighting and temperature are controlled by a 24-hour clock that follows a day night cycle. If a certain degree of humidity control is required without active control, the base can be filled with water. Accurate additional humidity control is optional. If an alarm is detected, potential free contacts, optical and acoustic alarms will be triggered.

Lighting:

The fluorescent tube is vertically installed behind the double-layer hot glass, divided into 4 levels of switches, and adjusted by a timer. There are 7 fluorescent tubes on each side of the cabinet; There are a total of 14. This design also allows for quick and easy execution of regular maintenance.

Sustainability:

The Economy Luxury Edition is produced in an ISO9001 certified factory and meets all the latest European environmental and safety requirements, such as CE marking, RoHS compliance, a cooling system free of HCFCs and CFCs, equipped with an economical and silent Danfoss/Secop compressor, model Optyma.

The characteristics of this room are:

+High energy efficiency.

+Due to the use of a silent Optyma compressor, it is very quiet.

Optional configuration.

+Additional humidity control is achieved through ultrasonic humidification.

+Network based multi-step controller.

+Various software options.

+Other fluorescent light sources (such as UVa&b) can be used.

+LED module+LED tube.

+Adjustable safety thermostat for low temperatures.

+Adjustable lighting.

+Expand the temperature range.

+Additional cable entry ports.

+Anti splash and waterproof power socket.

+Transparent organic glass inner door.

+Observation window on the door.

+The door can be opened to the left or right.

+Single layer glass with 81% ultraviolet transmittance.

+Stainless steel evaporation system (when using corrosive substances).

+Stainless steel platform, slide rail.

+Other options can be provided upon request.

Snijders Labs Plant Incubator/Light CultureTechnical parameters: