Small disc centrifuge*

Small disc centrifugeMain Features：
1. Continuous feeding, * simulating industrial production
2. The production capacity can be adjusted from 50 to 1000L/H, which can be used for laboratory research and development, as well as for continuous pilot production
3. Fat content in skim milk: not exceeding 0.05%
4. Equipped with feed storage tank and clear liquid storage tank (25L/50L two specifications), no other external devices are required for operation
5. Independent stainless steel plate frame bracket, freely adjustable horizontally, without the need for foundation or anchor bolts
6. The drum speed can reach up to 11000 revolutions per minute, and the separation factor is high
7. The main components of the drum are made of new high-quality high-strength stainless steel, which is highly corrosion-resistant
8. The drum has dynamic balance, reducing vibration and noise levels to the lowest possible level
9. This small butterfly centrifuge is applied in the fields of milk degreasing and purification, beverage juice clarification, biopharmaceuticals, oil purification, chemical energy, etc

Technical parameters of small butterfly centrifuge：

• Production capacity: 50-1000 liters/hour, with a minimum experimental volume of 10L per batch
• Drum speed: 11000 revolutions per minute
• Dimensions: 670mm X 455mm X 880mm
• Separation efficiency:After separationFat content ≤ 0.05%
• Three phase separation: liquid/liquid/solid
• Liquid/solid two-phase separation
• Power requirements: 3-phase/380 volts/50 hertz, 1.5KW
• This small butterfly centrifuge is equipped with a 50L stainless steel feeding tank
• Stainless steel bowl: The main components are specially made steel and high-quality steel; Other components made of 304 material; High precision manufacturing of discs
• Material inlet and outlet interface: Closed feed pipe, made of 304 material, equipped with sanitary pressure gauge, discharge micro control valve
• The bowl body cover is made of 304 stainless steel material, the bracket is covered with 304 stainless steel, and the motor cover and pin are made of 304 stainless steel
• The electrode motor of this small butterfly centrifuge has IP55 protection standard, F-class insulation, and overheat protection for the electric heating regulator
• The small butterfly centrifuge bowl body is made of 431 stainless steel on the longitudinal axis, driven by belt rollers and high-precision ball bearings