Single turn value encoder ESS58-TZ from Germany's Beijiafu

Single turn value encoder ESS58-TZ from Germany's Beijiafu：

Detection type: photoelectric sampling

Equipment type: Single coil value encoder

Functional safety related parameters

MTTFd 130 a

Task Time (TM) 20 a

L10 1,9 E+11 at 6000 rpm and 20/40 N axial/radial axis load

Diagnostic coverage rate (DC) 0%

Electrical Technical Specifications

Working voltage 10 .. 30 V DC

High power consumption of 4 W

Linearity ± 0.5 LSB (12 bits),

Output code binary code

The code course (counting direction) is programmable,

Clockwise increment (clockwise rotation, code course increment)

Clockwise decrease (clockwise rotation, code course decreases)

interface

Interface type TCP/IP

resolution

Up to 16 bits per cycle

The overall solution can reach 16 bits

Physical Ethernet

Transmission rate 10 MBit/s/100 MBit/s

connection

Connector Ethernet: 1 socket M12 x 1, 4-pin, D code

Power supply: 1 plug M12 x 1, 5 pins, size A

meet the standard

Protection level DIN EN 60529,

Shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)

Shell side: IP65

Climate test DIN EN 60068-2-3, no condensation

Emission interference EN 61000-6-4:2007

Immunity EN 61000-6-2:2005

Impact resistance DIN EN 60068-2-27100 g, 6 ms

Vibration resistance DIN EN 60068-2-6, 10 g, 10... 1000 Hz

Certification and Credentials

UL certification, cULus certification, general purpose, Class 2 power supply

environmental conditions

Working temperature 0 60 ° C (32... 140 ° F) standard with option T -40... 85 ° C (-40... 185 ° F)

Storage temperature -40 degrees Celsius .. 85 °C (-40 ... 185 °F)

Mechanical Specifications

Material shell: Aluminum with powder coating

Flange: Aluminum

Shaft: Stainless steel

Approximately 500g in weight

Rotating speed of 12000 min-1 without shaft seal

3000 min-1 with shaft seal

Inertia moment 30 gcm2

Initial torque ≤ 3 Ncm without shaft seal

≤ 5 Ncm with shaft seal

The tightening torque of the fastening screw is 1.8 Nm

Axis load

Angle offset ± 0.9 °

Axial offset static: ± 0.3 mm, dynamic: ± 0.1 mm

Radial offset static: ± 0.5 mm, dynamic: ± 0.2 mm

Single turn value encoder ESS58-TZ from Germany's Beijiafu