- Phone
-
Address
Shanghai
Product Categories
Shanghai Suman Electromechanical Equipment Co., Ltd
New German Beckhoff Single Loop Value Encoder ESS58-IZ
NegotiableUpdate on 05/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
New German Beijiafu single circle value encoder ESS58-IZ, industrial standard housing 58 mm, EtherNet/IP, maximum height of 30 bits, multiple turns, servo or clamping flange, forming a network loop through an integrated 2-port switch, IP address can be reset, no DIP switch for address setting, compatible with Rockwell/Allen Bradley/Schneider controls, mechanically compatible with all major encoders with fieldbus interfaces, rotation axis function,
Product Details
New German Beckhoff Single Loop Value Encoder ESS58-IZ:
Detection type: photoelectric sampling
Equipment type: Single coil value encoder
Functional safety related parameters
MTTFd 130 a
Task Time (TM) 20 a
L10 1,9 E+11 at 6000 rpm and 20/40 N axial/radial axis load
Diagnostic coverage rate (DC) 0%
Electrical Technical Specifications
Working voltage 10 .. 30 V DC
High power consumption of 4 W
Linearity ± 0.5 LSB (12 bits),
Output code binary code
The code course (counting direction) is programmable,
Clockwise increment (clockwise rotation, code course increment)
Clockwise decrease (clockwise rotation, code course decreases)
interface
Interface type EtherNet/IP
resolution
Up to 16 bits per cycle
The overall solution can reach 16 bits
Transmission rate of 100 MBit/s
connection
Connector Ethernet: 2 sockets M12 x 1, 4-pin, D code
Power supply: 1 plug M12 x 1, 4-pin, size A
meet the standard
Protection level DIN EN 60529,
Shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)
Shell side: IP65
Stainless Steel Type (INOX): * Meets IP67
Climate test DIN EN 60068-2-3, no condensation
Emission interference EN 61000-6-4:2007
Immunity EN 61000-6-2:2005
Impact resistance DIN EN 60068-2-27100 g, 6 ms
Vibration resistance DIN EN 60068-2-6, 10 g, 10... 2000 Hz
Certification and Credentials
UL certification, cULus certification, general purpose, Class 2 power supply
environmental conditions
Working temperature 0 .. 60 °C (32 ... 140 °F)
Storage temperature -40 degrees Celsius .. 85 °C (-40 ... 185 °F)
Mechanical Specifications
Material shell: Aluminum with powder coating
Flange: Aluminum
Shaft: Stainless steel
Combination 1 shell: Aluminum with powder coating
Flange: Aluminum
Shaft: Stainless steel
Combination 2 (Inox) shell: Stainless steel 1.4305/AISI 303
Flange: Stainless steel 1.4301/AISI 304
Shaft: Stainless steel 1.4305/AISI 303
Mass approximately 370 g (combination 1)
Approximately 840 g (combination 2)
Rotating speed of 12000 min-1
Inertia moment 30 gcm2
Initial torque ≤ 3 Ncm (models without shaft seals)
The tightening torque of the fastening screw is 1.8 Nm
Axis load
Angle offset ± 0.9 °
Axial offset static: ± 0.3 mm, dynamic: ± 0.1 mm
Radial offset static: ± 0.5 mm, dynamic: ± 0.2 mm
New German Beckhoff Single Loop Value Encoder ESS58-IZ
Similar Product Recommend
