-
E-mail
jsdups@163.com
-
Phone
15151486768
-
Address
No. 171 Dongwu South Road, Wuzhong Economic Development Zone, Suzhou City
Product Categories
Suzhou Jiashengda Electronics Co., Ltd
Single phase emergency lighting power supply (YJ series)
NegotiableUpdate on 11/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product use: Suitable for providing centralized power supply for various emergency lighting fixtures (including single in single out metal halide lamps, sodium lamps) in case of fire or other emergency situations in buildings
Product Details
Product UsageAn emergency power supply device suitable for providing centralized power supply to various lighting fixtures (including single in single out metal halide lamps and sodium lamps) in case of fire or other emergency situations in buildings.
Specification range:0.5KW-10KW
Specific specifications:0.5KW,1KW,1.5KW,2KW,3KW,4KW,5KW,6KW,7KW,8KW,9KW,10KW
Backup time:90 minutes, national standard type (can be configured with backup time according to design requirements)
YJSeries EPS Product Technical Parameters
|
model |
YJ-0.5KW |
YJ-1KW |
YJ-1.5KW |
YJ-2KW |
YJ-3KW |
YJ-4KW |
YJ-5KW |
YJ-6KW |
YJ-7KW |
YJ-8KW |
YJ-9KW |
YJ-10KW |
||
|
Capacity (kw) |
0.5 |
1.0 |
1.5 |
2.0 |
3.0 |
4.0 |
5.0 |
6.0 |
7.0 |
8.0 |
9.0 |
10 |
||
|
input |
Maximum current |
4.5 |
10 |
15 |
20 |
30 |
40 |
50 |
16 |
20 |
25 |
28 |
30 |
|
|
voltage |
Single phase 220V ± 25% Three phase 380V ± 25% |
|||||||||||||
|
frequency |
50Hz±5%Hz |
|||||||||||||
|
output |
voltage |
normal time |
Same voltage as the mains power supply |
|||||||||||
|
In case of emergency |
220V ± 3 single-phase three-way 220V ± 3 |
|||||||||||||
|
frequency |
50 ± 0.5% in emergency situations |
|||||||||||||
|
Normally, it is consistent with the mains power supply |
||||||||||||||
|
switch time |
Less than 0.25 seconds |
|||||||||||||
|
waveform |
Sine wave in emergency situations |
|||||||||||||
|
Normally, it is consistent with the mains power supply |
||||||||||||||
|
Emergency power supply time |
More than 90 minutes or as per design requirements |
|||||||||||||
|
Overload capacity |
Can work normally at 120% load |
|||||||||||||
|
noise |
When there is mains power, there is no static noise<55dB (during emergency power supply) |
|||||||||||||
|
relative humidity |
0~90% |
|||||||||||||
|
ambient temperature |
-24℃~ 40℃ |
|||||||||||||
|
altitude |
Below 2000 meters |
|||||||||||||
|
Adapt to load |
Mainly used for various loads such as lighting |
|||||||||||||
2，YJSeries fire emergency lighting power supply
Product UsageAn emergency power supply device suitable for providing centralized power supply to various lighting fixtures (including single in single out metal halide lamps and sodium lamps) in case of fire or other emergency situations in buildings.
Specification range:0.5KW-10KW
Specific specifications:0.5KW,1KW,1.5KW,2KW,3KW,4KW,5KW,6KW,7KW,8KW,9KW,10KW
Backup time:90Minutes, national standard type (can be configured with backup time according to design requirements)
