Single channel nitrate ion water quality sensor (nitrate nitrogen analyzer)

Single channel nitrate ion water quality sensorStandard cable of 10 meters;

It is a multi parameter sensor specifically designed for online measurement of ammonia nitrogen and nitrate nitrogen. The sensor adopts the ion electrode method, so when measuring, users only need to insert the sensor into the water sample to directly read the values of ammonia nitrogen and nitrate nitrogen.

Single channel nitrate ion water quality sensorNo pH compensation, built-in temperature compensation;

1) Before using the sensor, please shake it vertically in the air to ensure that there is no air residue on the ion electrode head.

2) Sensors should be placed in larger containers for long-term testing. Before client testing, please soak the sensor in clean water and replace it with clean water 2-3 times to ensure that there is no potassium ion residue on the surface of the pH electrode.

3) When the sensor is in use or left out of water for more than 30 minutes, please place the sensor in the water sample and let it stand for more than 60 minutes. After the value stabilizes, read the value.

Single channel nitrate ion water quality sensor (nitrate nitrogen analyzer)Economically reliable:

-No sample pretreatment is required, and ammonia nitrogen and nitrate nitrogen can be measured directly.

-PH measurement is standard

-No need for reagents, low cost of use

-Flexible to use and widely applicable:

-Wide range: 0.1-1000 mg/l NH4-N or 0.5-1000 mg/l NO3-N

-Easy to operate and safe:

-Directly installed by the pool without the need for a liquid collector or sample transfer pump

-Replacing the laminated cap every 6 months effectively extends the service life of the electrode. Standardized digital communication is plug and play