Silicon oxide ball forming instrument MS-5L

Silicon oxide ball forming instrument MS-5LThe equipment uses a pneumatic quantitative pump to control the liquid output. The uniformly distributed solution falls through the droplet head and then forms a ball through surface tension in the oil, which is neutralized and solidified in ammonia water or solidified by oil temperature. Afterwards, it is filtered, cleaned, and calcined into finished products, and the molding solution is prepared according to the material properties.

Silicon oxide ball forming instrument MS-5L，After aging, the droplet particles are dried and calcined to obtain spherical solid particles. The small balls prepared by this method have a uniform structure, low wear, and high strength, and are widely used as fixed bed and moving bed catalysts, catalyst carriers, and adsorbents.

According to the process operation, different shapes and sizes are required, so the forming operation is the main step in preparation, which greatly helps with material strength, activity, life, etc.

After-sales service

The whole machine comes with a one-year quality assurance period, and free after-sales service is provided during the warranty period in case of non-human damage;After sales service is available 48 Resolve or provide solutions within hours. Beyond the warranty period, we provide cost based repair and maintenance, as well as free technical consulting services.

Main technical parameters