Sigma optical machine with built-in small grating ruler and automatic slide table

Sigma optical machine with built-in small grating ruler and automatic slide tableIt needs to be used in conjunction with the platform controller (SHOT-302GS/304GS · HIT-M · HIT-S) to achieve high-precision and high reliability fully closed-loop control.

Sigma optical machine with built-in small grating ruler and automatic slide table

characteristic:

Strong ability to withstand torque loads and composite loads, not easily affected by torque, torque, etc., high rigidity, and good accuracy.

Although it has a built-in small grating ruler, its appearance is the same as the OSMS series with the same stroke, and the installation dimensions are also consistent.

Information:

>>>If you wish to replace the motor, please consult.

>>>Undertake customized replacement of lubricating grease.

>>>When used vertically for XY or Z-axis, please feel free to consult the usage precautions.

General indicators:

■ Technical specifications for motors/sensors

Motor type: 5-phase stepper motor 0.75A/phase (Tamagawa Seiki Co., Ltd.)

Motor model TS3664N4E10 (□ 24mm)

Motor step angle 0.72 °

Sensor power supply voltage DC5-24V ± 10%

Sensor current consumption OSMS (CS) 20-35: below 60mA (individual sensor below 20mA)

OSMS (CS) 20-85: below 80mA (single sensor below 20mA)

Electrical characteristics of sensor output terminalNPN collector open circuit output below DC30V and below 50mA

The meaning of sensor signal: When shading: Output transistor OFF

When shading: Output transistor ON (conducting): origin sensor, proximity origin sensor

■ Grating ruler

Power supply voltage/consumption current

DC5V±5%/50mA

■ Cable model

Driver cable

D15D15A-CA

Grating ruler cable

GSEF-CA-3

Recommended controller model for selection

controller

SHOT-302GS, SHOT-304GS, HIT-M·HIT-S