-
E-mail
gongleibl@163.com
-
Phone
18117106088
-
Address
Room 604B, Building B, Forest Bay Building, No. 269 Haining Road, Shanghai
Product Categories
- Charcoal black water washing and screening residue detector
- Battery negative electrode material
- zinc oxide
- Carbon black compressor
- Fully automatic water washing and screening residue detector
- New Carbon Black Particle Hardness Tester
- ASTM standard carbon black
- Carbon black compactor
- DBP oil absorption value
Shanghai Hainas Instrument Co., Ltd
Sieve residue detector
NegotiableUpdate on 12/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Functional PRINCIPLE $r $nMT 1 is a testing device used to determine the sieve residue of pigments, fillers, and other powder materials after mechanical water washing. $r $n uses water to wash the material through a high-quality sun screen, leaving impurities on the screen for easy analysis by testing personnel. The entire process of $r $n is fully automated and does not require manual operation.
Product Details
MT 1
MT1 is an equipment designed and produced according to the relevant standards of ISO 787-18 for testing powder sample material screening residue.
MT 1 is a testing device used to determine the residue of pigments, fillers, and other powder materials after mechanical water washing.
Test set MT 1 testing station for the analysis of sieve residue – compliant to ISO 787-18
The MT 1 is a testing device for the determination of sieve residue after mechanical water flushing of pigments, extenders and other powder materials in general (known also as Mocker apparatus).
Functional principle
Inside the testing device the pigment or extender to be tested is brought into a circular movement by a water jet rotor which is situated inside the vessel. The fine materials are separated from the coarse materials by the water and the fine particles are flushed through a sieve. The sieve residue is dried and gravimetrically analyzed according to the guidelines. Appropriate sieves (main range ISO 565) must be used according to the different testing guidelines. Furthermore, the recommendations of the DIN EN ISO 787-18 shall be used.
The percentage of the components of impurities is specifically prescribed and is analyzed in order to maintain the desired product quality. The test set MT 1 quickly provides the result which can be adjusted to the prescribed limiting values within the quality control.
Examples for application
The test set MT 1 is used worldwide for the testing of inorganic pigments, aerosils, silanes and carbons and also for materials like zinc oxide, titanium dioxide and other powder materials. Applications for organic polymers are possible in selected cases.
