Shock standard vibrating screen machine

ZBSX-92A typeShock standard vibrating screen machineSuitable for laboratory screening and analysis of materials in highway, construction, geological and metallurgical research departments, with a 5-minute digital display control each time the machine is turned on, making it convenient and simple to complete grading work.

Technical parameters:

(1) Sieve diameter: 300mm to 200mm

（2）震幅： 12mm

(3) Vibration frequency: 147 times/minute

(4) Screen shaking frequency: 221 times/minute

(5) Rotation diameter: 12.5mm

(6) Power supply voltage: 380V~370W

ZBSX-92A typeShock standard vibrating screen machineInstructions for using the sieve

1. When placing sieves, they should be stacked in order of sieve hole size, and an additional sieve base should be added.

2. Pour the material to be screened and analyzed into the top sieve, cover the sieve cover, and then place it in the sieve seat of the shaker.

3. Reverse the rotation of the rubber wood handle on the clamping sieve plate, slide the entire clamping sieve plate downwards onto the sleeve sieve, and then rotate the rubber wood handle on the clamping sieve plate clockwise. The top rod shaft inside clamps the bearing seat, securing the entire sample sieve.

4. Turn the timer knob on the shaker to the desired screening time, turn on the power switch, and the shaker will start the screening and rotating operation.

5. When the timer reaches the predetermined time position, the pendulum will automatically stop working.

6. Rotate the rubber wood handle on the clamp sieve disc counterclockwise to release the central sieve disc and lift it upwards, fix it on the sliding sleeve, and remove the sample sieve. Weigh the remaining particles in each sieve in sequence using a balance to accurately determine the analysis ratio.

7. When working for the first time, there was no vertical vibration. Due to the motor reversing, please replace the power cord.

8. Turn off the power after work is completed.

Precautions

1. Ensure correct input of working AC voltage and ensure reliable grounding of instruments and equipment.

2. Instruments and equipment must be placed flat on a fixed tabletop.

3. Prevent and avoid vibration, collision, high temperature, and direct sunlight.

4. Do not place instruments and equipment in damp or corrosive gas environments.

5. Please do not use towels with easily detachable fibers to wipe instruments and equipment.

6. Please do not place flammable materials near instruments and equipment, and provide necessary fire-fighting facilities to ensure preparedness.