Shengbang Gear Reduction Motor Horizontal 3700W 1:3 to 1:150

1. The insulation level of the horizontal gear reduction motor in Taiwan's city states is Class F, and the applicable voltages are three-phase 380V/220V/230V/240V/400V/415V/440V-50HZ, three-phase 220V/240V/380V/415V/440V/460V/480V/600V/-60HZ, single-phase 110V/115V/200V/220V/230V-50HZ, and single-phase 110V/220V/240V-60HZ.

2. The Taiwan Shengbang 3700W reduction motor is suitable for motor pole numbers including three-phase two-stage motor, three-phase four stage motor, three-phase six stage motor, and three-phase eight stage motor.

3. The city-state gear reduction motor is suitable for temperatures ranging from -10 degrees Celsius to 40 degrees Celsius, with humidity below 90%, and is suitable for altitudes below 1000 meters. In special areas and weather conditions, antifreeze oil can be added or waterproof motors can be customized.

Horizontal 3700W city-state gear reduction motor body:

CH-5 and CH-6 reducers have output shaft diameters of 40mm and 50mm respectively;

The CH-5 and CH-6 reducers are both made of cast iron material FC-20; The motor adopts a standard fully enclosed special aluminum shell motor;

If the operating environment of the reducer equipment contains certain corrosive gases, CH3700-ST type Shengbang iron shell reducer can be selected.

CPG gear reduction motor horizontal 3700W gear:

The gears of the CPG gear reducer are all precision hobbing processed, with a gear machining accuracy level of 2-3;

The gear material of the city-state reducer is S45C, quenched and tempered to HRC21 degrees, and then subjected to high-frequency heat treatment to HRC45-48 degrees.

Gear shaft of 3700W city-state gear reduction motor:

The internal gear shaft of the city-state gear reduction motor is precision hobbing processed by SKIVING, with a gear accuracy level of 1-2;

The gear shaft material of the city-state gear reducer is SCM21, quenched and tempered to HRC21 degrees, and then subjected to carburizing heat treatment to HRC58-61 degrees;

The internal gear shaft material of the city-state motor is SCM4 quenched and tempered to HRC21 degrees, and then subjected to high-frequency treatment to 50-53 degrees.

Bearings and oil seals for CPG gear reduction motor 3700W:

The bearings of CPG reducer are made of Swedish SKF or precision bearings of the same grade to ensure long-term operation life;

The CPG motor shaft side is mainly equipped with high-temperature resistant VITON oil seals, which can ensure the prevention of lubricating oil leakage inside the motor.

The protection function of the horizontal 3700W city-state gear reduction motor:

The junction box of the city-state motor adopts an aluminum alloy dedicated IP-55 aluminum junction box, which has excellent waterproof and dustproof properties;

The back cover of the city-state motor adopts a waterproof motor back cover, and an oil seal is added at the axis to prevent dust and external moisture from entering the motor.

Characteristics of horizontal 3700W motor for city-state gear reducer:

Three phase motor: using standard fully enclosed specialized aluminum shell motor, with extremely high operating efficiency and excellent heat dissipation performance of the gearbox body;

Single phase motor: using a standard semi dense special iron shell motor with an iron junction box, it has high operating efficiency and is easy to dissipate heat.