Sheath type electric heater

Product Features:
Small size and high power: The heater primarily uses bundled tubular electric heating elements.
Fast thermal response, high temperature control accuracy, and high comprehensive thermal efficiency.
High heating temperature: The heater is designed for high task temperatures up to 850 ℃. The outlet temperature of the medium is average and the temperature control accuracy is high.
Widely applicable and highly adaptable: This heater can be used in explosion-proof or ordinary places, with explosion-proof grades up to DIIB and C, and a pressure resistance of up to 20MPa.
Long lifespan and high reliability: This heater is made of extraordinary electric heating materials, designed with low external power load and multiple maintenance measures, greatly increasing the safety and lifespan of the electric heater.
Fully automated control: According to the requirements, the heater circuit design can facilitate the active control of parameters such as outlet temperature, flow rate, and pressure, and can be connected to a computer network. The energy-saving results are obvious, and the heat generated by electrical energy is almost * transferred to the heating medium.

Working Principle:
For example, electric heaters use metal to generate eddy currents in an alternating magnetic field to generate heat and absorb it, converting electrical energy into light energy; For example, solar water heaters absorb both solar radiation heat energy and solar energy (photoelectric effect) converted into heat energy; Bioenergy is a type of energy that stores solar energy in the form of chemical energy using organisms as carriers. It directly or indirectly originates from the photosynthesis of plants. In addition, there are also energy conversion modes such as nuclear energy and wind energy, but generally they need to be converted into electrical energy for use.

Application scenarios:
1. Heating of chemical materials in the chemical industry, drying of some powders under certain pressure, chemical processes, and spray drying.
2. Heating of hydrocarbons, including petroleum crude oil, heavy oil, fuel oil, thermal oil, lubricating oil, paraffin, etc
Process water, superheated steam, molten salt, nitrogen (air) gas, water gas, and other fluids that require heating should be heated.
Due to its excellent explosion-proof structure, the equipment can be widely used in places that require explosion-proof, such as chemical, *, petroleum, natural gas, offshore platforms, ships, mining areas, etc.