Shantou Ultrasonic Digital Flaw Detector

Features:

• Ethernet communication enables real-time bidirectional communication and remote control between the flaw detector and the computer

• Equipped with probe frequency detection function

• High sensitivity margin, highlighting the advantages of wideband and high sensitivity respectively

• The USB interface can realize the internal storage of data in the instrument, the transfer of data waveforms to a USB drive, and the printing of inspection reports

• The pulse repetition frequency can be adjusted to avoid reverberation signals during the flaw detection process

• Interface wave tracking function, through the logical relationship between gates A and B, makes it easy to achieve water immersion testing or accurate thickness measurement

• Peak memory and echo comparison function help to quickly scan, measure, and compare workpieces

• *The DAC and TCG functions facilitate echo evaluation and are more suitable for on-site flaw detection of large workpieces and coarse-grained materials

• RF echo display will be of great help for thin-walled material measurement, academic research, and qualitative analysis

• Capable of measuring probe angle (K value)

• During oblique beam inspection, the secondary reflection wave signal color differentiation display function is used.

• Large capacity storage can store up to 1000 datasets, including waveforms, curves, parameters, flaw detection reports, etc

• The short film playback function realizes the scanning of dynamic process records

• High brightness color TFT LCD display brings the best reading and testing effect

• 10 waveform colors and character colors to choose freely

• Large capacity lithium battery pack can work continuously for more than multiple hours

Inspection of large forgings:
The large detection range, coupled with high sensitivity far-field detection capability, makes CTS-4020 more suitable for the detection of large forgings or coarse-grained materials.

Waveform display from 500mm Φ 2 flat bottomed hole

Qualitative analysis of echoes：
The RF echo display function is very suitable for situations that require further analysis of echo characteristics.

RF waveform display of echo from a Φ 2 flat bottomed hole

Thin plate detection：
CTS-4020 has excellent near area resolution, making it very suitable for detecting near area defects in forgings and measuring wall thickness of pressure vessels and pipelines.

Bottom echo of 1.2mm steel plate

Ethernet communication：
CTS-4020 has network communication function and can be directly connected to a computer through 100Mbps Ethernet to achieve real-time display and remote control functions.

Interface diagram of upper computer

weld inspection：
The DAC curve and echo comparison function of CTS-4020 * make echo evaluation work easier, more convenient, and more accurate.

Defect echoes from welds and a set of DAC curves