Shangtai residual chlorine detector with live box and circulation groove

NegotiableUpdate on 05/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Shangtai residual chlorine detector is easy to operate with a live box and a flow channel. After completing the installation and debugging of the electrical box and circulation channel, it is easier. More functional. The microcomputer residual chlorine transmitter CT-6300 or CT-6300RS is plug and play, with a wide range and low detection limit, and built-in temperature automatic compensation. It is an online residual chlorine monitoring device that is particularly suitable for wastewater treatment in membrane treatment processes such as reverse osmosis.

Product Details

Shangtai residual chlorine detector with live box and circulation grooveDetailed Introduction

The Shangtai residual chlorine detector has an affordable price with a charged box and a flow channel. The residual chlorine online detector uses selective electrodes for residual chlorine detection,Used for rapid detection of residual chlorine in water, using national standard methods, it can quickly and accurately detect the content of residual chlorine in water.

Models CT-6300, CT-6300RS

Test project Residual Chlorine/O3/TEP

Test range Cl 2 0.00~100.0ppm (mg/l), depending on the electrode

O3 0.00~20.00ppm(mg/l) ， Depending on the electrode

TEMP -30.0~130.0°C

Analytical degree

Cl2 0.01ppm(mg/l)

O3 0.01ppm(mg/l)

TEMP 0.1°C

Accuracy

Cl2 ±0.5%±1Digit

O3 ±0.5%±1Digit

TEMP ±0.2°C±1Digit

Temperature compensation can be selected from PT1000 or NTC30K automatic temperature compensation, or manual temperature compensation

The working environment temperature ranges from 0 ° C to 50 ° C

Storage environment temperature -10~70 ° C

Display screen backlit large LCD display with backlight sensor for automatic and manual backlight selection

Current output one

Isolation type 0/4~20mA can be set to correspond to the measurement range of Chlorine/O3, * large load

500Ω

The RS485 interface has, Modbus

Control contact output RELAY ON/OFF contact, 240VAC 0.5A Max. (recommended)

Control the setting of two independent HI/LO control points

Cleaning set contact output, ON 0~9999 seconds/OFF 0~999.9 hours

Voltage output DC ± 8V Max. 0.5W

Power supply 100V~240VAC ± 10%, Max. 5W，50/60Hz

Fixed method: wall mounted/pipe mounted/panel mounted

The dimensions of this machine are 144 mm × 144 mm × 115 mm (H × W × D)

Hole size 138 mm × 138 mm (H × W)

Weight 0.82Kg

Note: If there are any modifications to the specifications of the residual chlorine detector mentioned above, the actual factory instrument shall prevail.