Servo driver+3.0KW servo motor

Product List:

1One servo motor

2One servo drive

3One encoder cable（3Rice)

4One motor power cord（3Rice)

5、25One core parallel port connector

6One manual

1 Product Features

★ Motor power adaptation2.3KW～7.5KW

★380V

servo controller ★

Equipped with torque, speed, position, point-to-point positioning, and hybrid switching functions ★Position control, speed control, servo electric tool holder andJOG

Multiple control methods ★

Built in brake system, suitable for applications with high loads ★4built-in

Segment positioning control command, allowing for free planning of point-to-point positioning control ★1The speed regulation ratio is5000：

It has stable torque characteristics from low speed to high speed ★The maximum speed of the servo motor can reach

6000rpm ★Control positioning accuracy ±

0.01% ★Pulse input frequency: less than

500KHZ ★Electronic gear:1/3000030000

～ ★0Analog input:～10V0perhaps～±

10V ★Improved space vector algorithm, compared to ordinary onesSPWM

Higher torque and lower noise★

300% Strong overload capacity and load-bearing capacity★Wide power supply adaptability range:~380V

± 20%

★ Complete protection functions: overcurrent, overvoltage, overheating, short circuit, and encoder failure

★

Multiple display functions: motor speed, motor current, motor position, position deviation

Difference, number of input pulses, pulse frequency, linear velocity, input-output interface