Sensor A0000291

IPFsensorA0000291

Shanghai Yinfa International Trade Co., Ltd. supplies to GermanyIPFSensor A0000291TheIPFPressure sensorsIPFTemperature sensorIPFInductive sensorsIPFCapacitive sensor.

The main types are:

Pressure sensor: ceramic or stainless steel diaphragm key setting,DW36The series is suitable for low pressure and negative pressure measurement,DW35Series can be used for high voltage measurement, measurable600barThe pressure. Programmable, with2Road switch output（pnp/npn）Analog output（0/4-20Ma）And time delay,4bitLEDDisplay. Equipped with fault control, such as sensing components, overvoltage (peak value can be recorded), analog and switch output faults. After installation, the control panel can350Rotate in degrees.

The models are as follows:

DW353114TheDW353116TheDW353117TheDW35311DTheDW35311FTheDW35311GTheDW363110TheDW363111TheDW36311HTheDW36311JTheDW403002TheDW403004TheDW403005TheDW403007TheDW433000TheDW433001TheDWA00000TheDWA00001TheDWA00002TheDWA00003

Temperature sensor: made of stainless steel material, measuring range-40-120℃，4-20mAAnalog output; Equipped with switch output, programmable; With switch delay; The operation panel is rotatable330°; with short circuit and polarity reverse protection; optionalWINDOWFunction. The equipment is equipped with a weightless positionMIN/MAXMemory. Can be used to monitor the temperature of fluids inside pipelines.

The models are as follows:YT450020TheYT450024

Inductive sensor: The vibrating coil generates an electromagnetic eddy current zone. When any conductive material object enters this zone, another eddy current will be generated that reacts with the inductive sensor, causing the oscillation ability of the sensor to decay and the parameters of the internal circuit to change. This can identify whether a metal object is approaching and control the on or off of the switch. Inductive sensors require that the detected object must be a metal object.IAThe series is flat and very popular.IBThe series includes flush standard type, standard type and small design, and top pole series.IMThe series is a non flat and also very popular series; The structure of photoelectric sensors is dielectric and can be used in high voltage, electrical noise, high temperature, corrosive and stress environments. The signal is resistant to electromagnetic and radio frequency interference; High reliability, safe operation, and no discharge hazard; No residual capacitance and magnetic induction effect; Small size and light weight; Can be used in harsh environments that are inaccessible; Remote sensing can be performed.

Some models are as follows:

OE050100TheOE050170TheOE080100TheOE080170TheOE100101TheOE106001TheOE106003TheOE110100TheOE110170TheOE120101TheOE120105TheOE120106TheOE120120TheOE120123TheOE120125TheOE120126TheOE136070TheOE140170TheOE140406TheOE140476TheOE150105TheOE150175TheOE150400TheOE150470TheOE160400TheOE160470TheOE170421TheOE180303TheOE180323TheOE18040ATheOE18040CTheOE18042ATheOE18042CTheOE255800TheOE505800TheOE550500TheOE550505TheOE555900TheOE555905TheOE705906TheOER40100、

Capacitive sensor: electric field induction, not affected by the material of the detected object,. Capable of sensing non-metallic substances, can be used to detect all materials, with fast response speed, small volume, detectable liquid level, and available in both flush and non flush specifications***Version, temperature can reach250℃, can be used for detecting oil.

Some models are as follows:

KB080100TheKB080170TheKB087000TheKB120000TheKB120100TheKB120120TheKB120400TheKB120420TheKB127000TheKB180000TheKB180100TheKB180120TheKB180400TheKB180420TheKB187000TheKB200100TheKB260100TheKB300000TheKB300100TheKB300120TheKB300400TheKB300420TheKB304100TheKB307000、

Color recognition sensor: detects slight color changes and even identifies color differences in certain parts of high-speed moving objects, capable of recognizing hundreds of colors

Differences. Can be used for data shelving, quality control, and process automation. The models are as follows:

OF230125，AO000074

Ultrasonic sensor: non-contact position switch,***It can be used in harsh operating environments and can output analog or switch signals. Can detect any

Surface texture and any material object. The detection medium can be solid, liquid, particle, or powder, which is not affected by the shape and color of the object, and can also be used for detection

Transparent materials, such as films or liquids.

Application scenarios:

*Fill the liquid level of block materials and liquids

*High level measurement, such as packaging equipment on conveyor belts or pallets

*Distance measurement, such as the detection of materials that cannot be optically recognized.

*Measurement of stack height on loading and unloading equipment

*Control of winding and unwinding of any thin film material

*Thickness and diameter detection

*Applying relaxation measurement to control the tension of materials