Selling YJT activated carbon fiber treatment organic waste gas recovery device

NegotiableUpdate on 02/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Selling YJT activated carbon fiber treatment organic waste gas recovery device regeneration method: The carbon fiber filter cartridge can be regenerated by our company or by the user themselves. After saturation, the carbon fiber felt tube is taken out and placed in a container. It is heated with steam for 10-15 minutes and then taken out to dry before being put into the equipment for continued use. The evaporated gas is condensed by a condenser, and the organic solution is separated by a storage separation tank. If the separated substance has no utilization value, it can be poured into a coal pile and burned. Selling YJT activated carbon fiber treatment organic waste gas recovery device

Product Details

The product is a customized product, and the above quotation is a deposit

Working principle

It utilizes the advantages of highly efficient adsorbent materials - activated carbon fiber with strong adsorption capacity and fast adsorption and desorption speed - to purify the air and recover organic solvents.

Structure and Characteristics

This complete set of equipment mainly consists of: fan, air filter, purifier, switching valve, condenser, separator, etc. Using water vapor desorption. By switching the valve, the solvent can be dissolvedThe adsorption and desorption regeneration in two purifiers, the desorbed solvent and water vapor enter the condenser for condensation, and after separation by the separator, pure solvent can be obtained.

Main supporting equipment parameters

Concentration:500FPM－10000PPM

Quantity: greater than3000m3h

Solvent recovery rate: greater than95%

Operating temperature: Adsorption and desorption with water vapor at room temperature

Performance of carbon fiber

Activated carbon fiber is a new type of high-efficiency adsorbent material that has a high adsorption capacity for toxic and harmful gases, with fast adsorption and desorption rates. Carbon fiber is suitable for use in hot air（At 105 ℃, it can be desorbed and reused, and has corrosion resistance that is not afraid of acid and alkali. It has a significant purification effect on organic waste gases containing benzene derivatives, sulfur dioxide, carbon monoxide, nitrogen oxides, hydrogen sulfide, petroleum gas, odors, etc.

regeneration method

Carbon fiber filter cartridges can be regenerated by our company or by users themselves. After saturation, remove the carbon fiber felt tube and place it in a container, then heat it with steamAfter 10-15 minutes of drying, put it into the equipment and continue to use. The evaporated gas is condensed by a condenser, and the organic solution is separated by a storage separation tank. If the separated substance has no utilization value, it can be poured into a coal pile and burned.

Contact: Manager Yao mobile phone:18831897799