-
E-mail
yinyangyang@yunjingtianhe.com
-
Phone
13276363313
-
Address
Building 1, Weifang High tech Zone Optoelectronic Industry Accelerator (Phase I), No. 155 Guangdian Circuit, Weifang High tech Zone, Shandong Province
Product Categories
Shandong Tianwei Environmental Technology Co., Ltd
Self cleaning turbidity sensor
NegotiableUpdate on 02/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The self-cleaning turbidity sensor is designed specifically for long-term stable monitoring of water turbidity. It uses optical scattering principle to accurately capture suspended particulate matter content in water, and integrates automatic cleaning brush and anti adhesion coating to regularly or on-demand remove surface dirt from the sensor, avoiding measurement errors caused by impurity deposition. It has a high protection level and is suitable for complex environments such as sewage, surface water, and industrial wastewater. It supports analog or digital signal output and real-time data transmission to the monitoring system, helping users efficiently grasp water quality changes, reduce manual maintenance costs, and improve monitoring reliability.
Product Details
Self cleaning turbidity sensorSpecially designed for long-term stable monitoring of water turbidity, it uses optical scattering principle to accurately capture suspended particulate matter content in water. At the same time, it integrates automatic cleaning brush and anti adhesion coating, which can regularly or on-demand remove sensor surface dirt, avoiding measurement errors caused by impurity deposition. It has a high protection level and is suitable for complex environments such as sewage, surface water, and industrial wastewater. It supports analog or digital signal output and real-time data transmission to the monitoring system, helping users efficiently grasp water quality changes, reduce manual maintenance costs, and improve monitoring reliability.
Oneworking principle
Self cleaning turbidity sensorDetermine the concentration of particles in a liquid by measuring the scattering of light. It uses a light source to illuminate the liquid and then measures the scattered light intensity at different angles. This sensor adopts the 90 ° angle scattered light method, linearly processes the collected values, and outputs turbidity values through temperature compensation algorithm.
IITechnical Specifications
| Measuring principle | Scattering light method (optional for cleaning) |
| measurement range | 0～40NTU 0～1000NTU 0～3000NTU |
| resolution | 0.1NTU |
| precision | ±1%，±0.3℃ |
| temperature compensation | Automatic temperature compensation |
| output method | RS-485（Modbus/RTU） |
| Storage temperature | -5-+65℃ |
| working environment | 0～50℃，≤0.2MPa |
| Installation method | Immersion installation, 3/4NPT installation thread |
| Cable length | 5m |
| power consumption | 12V power supply: When the cleaning brush is not working, the product consumes about 0.5W of power, and when the cleaning brush is working, the product consumes about 1.5W of power |
| power supply | DC：12V-24V |
| Protection level | IP68 |
| calibration method | Two-point calibration |
| Shell material | ABS + metal |
IIISize/Installation
1. Size chart
2. wiring diagram
The cable is a 4-core shielded wire:
Red - Power cord blue/black - Ground wire green -485B yellow -485A
The cable color may vary slightly depending on the production batch, please refer to the cable silk screen printing for details.
3. install
4maintenance and upkeep
Sensor maintenance:
If the sensor needs to be cleaned, warm water and an appropriate amount of detergent can be used for cleaning.
Note:
Avoid strong vibrations that can damage the transparent glass in front of the ring, and do not scratch it with hard objects.
Similar Product Recommend
