Self aligning machine 45ZLJ04

45ZLJ04 Self aligning Corner MachineThe stator is all hidden pole type, and the three-phase windings D1, D2, and D3 connected in a star shape are placed in the slot and directly led out. The rotors of LF, LJ, and LK self angle machines are of the convex pole type and equipped with 1-2 short-circuit circuits. The rotor of KB self angle machine is of the hidden pole type and has single-phase windings Z1 and Z2, which are led out through two pairs of slip rings and electric brushes; KCF and LCF self aligning machine rotors are also hidden pole type, but three-phase windings Z1, Z2, and Z3 connected in a star shape are placed on the rotor, which are led out through three pairs of slip rings and electric brushes; The fixed and rotor of the power self-tuning angle machine are both hidden pole type. Except for ZCF where three-phase windings Z1, Z2, Z3 are placed and ZKB where single-phase windings Z1, Z2 are placed in the rotor slot, the remaining ZLF and ZLJ are placed with two mutually orthogonal windings, one of which is the single-phase excitation winding Z1, Z2, and the other is the damping winding that has already been short circuited. The rotor winding is led out through two or three pairs of slip rings and electric brushes. In order to meet the damping performance requirements, mechanical dampers are installed on the rotor of the receiver.

ZKB self-adjusting transformer

ZLF torque type self-adjusting angle transmitter

ZLJ torque type self-adjusting angle receiver

ZCF torque differential self-adjusting angle transmitter

KF controlled self-adjusting angle transmitter

KCF controlled differential self-adjusting angle transmitter

KB controlled self-adjusting transformer

LF torque type self-adjusting angle transmitter

LCF torque differential self-adjusting angle transmitter

LJ torque type self-adjusting angle receiver

Usage conditions:

1. Altitude: not exceeding 4000m;

2. Environmental temperature: -40 ℃ -+55 ℃;

3. Relative humidity: not exceeding 95% (air temperature is 25 ℃);

4. Vibration: vibration frequency of 10~150HZ, acceleration of 2.5g, low-frequency limited double amplitude of 1.5mm;

5. Impact: acceleration of 7g;

6. Air pressure: 6.05 × 10.4 Pa.

45ZLF03

45ZLJ03

45ZLF02

45ZLJ02

55ZLF03

55ZLJ03

55ZLJ02

55ZLJ04

55ZLF04

55ZLF02

45ZLF04

45ZLJ04