Secondary vacuum packaging machine

1. Product Introduction

Our Hunan Fuliuchuang Technology Co., LtdSecondary vacuum packaging machineMainly used for incidental piercing and secondary vacuum packaging processes of flexible packaging batteries.

2. Main features

●Secondary vacuum packaging machineThe head is made of copper material, which has good heat transfer effect, saves electricity consumption, improves work efficiency, and is more energy-efficient than similar products;

●The pressure of the upper and lower heads can be adjusted through a pressure regulating valve to meet different process parameter requirements;

●The upper and lower heads are driven by cylinders and guided by two linear guides, allowing for flexible movement up and down,Guiding accuracyEnsure the requirement for parallelism of the product after edge sealing;

●Equipped with automatic puncture function;

●The cover chamber is driven by a cylinder and guided by a linear guide sleeve, which can move up and down flexibly and accurately to ensure the sealing requirements of the product;

●Suitable for batteries of different specifications and easy to adjust;

●Easy to operate, aesthetically pleasing, small in size, and lightweight;

3. Technical parameters (specific parameters can be consulted with customer service)

●The cavity is made of aluminum alloy, which is corrosion-resistant and has a sturdy structure;

●Vacuum degree ≤ -96Kpa (buyer's own vacuum pump);

●Head temperature: from room temperature to 250 ℃, adjustable temperature;

●Temperature control accuracy: ± 1.5 ℃;

●Heat sealing pressure: adjustable from 0 to 7Kg/cm2;

●Heat sealing time: adjustable from 0 to 99 seconds;

●Edge width: 5 ± 0.4mm (according to customer requirements);

●Sealing thickness accuracy (mm): The difference in packaging thickness between any two points is less than 15um;

●Gas consumption: approximately 0.2L of compressed gas per seal;

●Air compression working speed: ≥ 180 times/h;

●Power supply: 220V/50Hz;

4. Optional models

▲ FLC-BFZ200--Maximum edge sealing size 200mm

▲FLC-BFZ300--Maximum edge sealing size 300mm

▲FLC-BFZ350--Maximum edge sealing size 350mm

▲FLC-BFZ400--Maximum edge sealing size 400mm

5. Maintenance methods and precautions

1. Regularly wipe the upper and lower plates as well as the vacuum chamber to maintain cleanliness.

2. Lubricate the moving parts of the bearing with oil to maintain smooth movement.

If not in use for a long time, wipe the surface of the moving parts of the mechanism clean and spray anti rust oil on the surface for protection.

4. Regularly inspect the screws, nuts, pins, and other fasteners in various parts of the machine to prevent loosening and eliminate the machineQuality accidents and personal accidents.