Seam fatigue testing machine

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

A testing machine used to evaluate the stitching strength of materials used on the surface of car seats. It is a device used to evaluate the seam fatigue of car seats caused by increased external forces due to vibrations and other factors during driving. Complies with JASO M403, GMW3405, GM standards, Ford standards, Honda standards, Mazda standards, Nissan standards, GB/T4043-2010 and other standard requirements

Product Details

Seam fatigue testing machineSeamed Line Fatigue Tester

Model: HY-734

Purpose:A testing machine used to evaluate the stitching strength of materials used on the surface of car seats. It is a device used to evaluate the seam fatigue of car seats caused by increased external forces due to vibrations and other factors during driving.

Test Introduction:The specification of the sample is width10cm, Long10cmTake two pieces each in the warp and weft directions to form a group, and prepare two groups. Overlap the surfaces of two samples and start from one side10mmUse a sewing machine to sew the seams at intervals of20±2Needle/100mmInstall the test piece onto the fixtures on both sides of the testing machine and proceed with the testing2500The return load is29.4N（3kg）The speed is30Repeated round trip/minute trial. After the experiment is completed, the fatigue strength of the test piece seam is evaluated and judged by measuring the size of the small holes caused by slippage and other reasons under load.

Compliant with standards: JASO M403,GMW3405,GMStandards, Ford standards, Honda standards, Mazda standards, Nissan standards,GB/T4043-2010Waiting for standard requirements

Product Technical Specifications:

Number of test groups: 2 or 4 groups

Reciprocating speed: 30 times/minute

Test stroke: 150mm

Test load: 29.4N/3kg