Schneider XKB series circuit breaker master switch Shanghai agent

Schneider XKB series circuit breaker master switch Shanghai agent

This master controller is designed to be lightweight and compact in appearance; Can be installed on the surface of the console or portable control box

Two types:

B XKB A: with standard electrical contact closure sequence

B XKB E: Self designed electrical contact closure sequence

Length: 130 mm. Unidirectional travel: 28 °.

Standard and Customization

The following limit gates can be used to combine the desired motion trajectory.

9 main combinations

The complete travel of the control lever can be limited by limit blocks: 20 ° limit block (XKB Z972) or 12 ° limit block

(XKB Z971) is used in conjunction with limit gate Y or Z.

B standard handle: a universal handle with an operating ball fixed to the head. Contact point with 1 center position, at zero position

close.

Zero position (center position) mechanical interlock handle: equipped with a zero position mechanical lock and a center position contact point that closes at zero position.

Press down handle: The contact associated with it will disconnect after the handle is released.

Flat or convex button handle: When the button is released, the associated contact is disconnected

Note: When selecting the main controller, the choice of handle type is very important because after the installation and combination of the handle

The type cannot be changed anymore.

There are 3 gears in one direction.

B has gears, hold position: 3 gears in one direction (12 °, 20 °, 28 °).

B has gear spring reset: 3 gears in one direction (12 °, 20 °, 28 °). For XKB E, each gear may

Only one pair of contacts can be used

B no gear, spring reset: one-way travel of 28 °. (XKB E: Each gear may only use one pair of contacts)

There are two types of contact blocks

Contact blocks with 4 pairs of contacts per moving mechanism

A contact block with 4 pairs of contacts and 1 pair of zero position contacts for each motion mechanism

Each type of contact block allows users to use an additional pair of contacts, whose functionality is determined by the selected handle type.

B XKB A implements the standard cam closing sequence, which is a cast and cannot be changed.

There are two frameworks to choose from:

The frame of each motion mechanism with 4 pairs of contacts: each motion mechanism has 2 pairs of directional contacts and 2 pairs of functional contacts.

Each motion mechanism has 4 pairs of contacts and 1 pair of zero position contacts: each motion mechanism has 2 pairs of directional contacts, 2 pairs of functional contacts, and 1 pair

Zero position contact point.

B XKB E implements customized cam closure sequence, which is achieved by installing cam plates onto the cam frame. Overlapping contact points are not allowed

realization.

There are two frameworks to choose from:

Frame with 4 pairs of contacts per moving mechanism: Each moving mechanism has 4 pairs of contacts.

Each moving mechanism has 4 sets of contacts and 1 set of zero position contacts: each moving mechanism has 4 sets of contacts and 1 set of zero position contacts.

100 x100 mm anodized aluminum sign, dark surface treatment: standard characters "hoist", "cross"

trA Vel”，“long trA Vel”，“slewing”， Customization of special character labels is possible.

When using a frame with 4 pairs of contacts in each direction, each motion mechanism can be equipped with an additional 2 potentiometers.

When using 4 pairs of contacts in each direction and 1 pair of zero position contacts, each moving mechanism can be equipped with an additional potentiometer.

Schneider XKB series circuit breaker master switch Shanghai agent

Schneider XKB series circuit breaker master switch Shanghai agent

Schneider XKB series circuit breaker master switch Shanghai agent