Schneider 0.75 to 75kW fan pump frequency converter ATV212

NegotiableUpdate on 05/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Schneider 0.75 to 75kW fan pump ATV212 $r $n main information $r $n product short name $r $nATV212 $r $n motor type $r $n asynchronous motor $r $n power phase number $r $n3 $r $n motor power (kW) $r $n18.5 kW $r $n motor power $r $n25 hp $r $n power supply voltage range $r $n323... 528 V $r $n power supply frequency $r $n50... 60 Hz -5... 5% r $n line current $r $n27.8 A on... 480 V $r $n34.8 A on... 380 V $r $r $n $n Product Series $r $nAltivar 212 $r $n Product Type $r $n Inverter

Product Details

Schneider 0.75 to 75kW fan pump frequency converter ATV212

Key information
Product Short Name	ATV212
Motor Type	asynchronous motor
Power phase number	3 phases
Electric motor power (kW)	18.5 kW
Motor power	25 hp
Power supply voltage range	323…528 V
power supply frequency	50...60 Hz - 5...5 %
Line current	27.8 A on... 480 V 34.8 A on... 380 V
Product Series	Altivar 212
Product Type	frequency converter
Application Type	Pumps and fans in HVAC systems
Communication Port Protocol	APOGEE FLN BACnet LonWorks Serial port Modbus Metasys N 2
power supply voltage	380...480 V - 15...10 %
EMC filter	C2 class EMC filter
IP protection rating	IP21

Supplementary information
apparent power	28.2 kVA on... 380 V
Continuous output current	37 A on... 380 V 37 A on... 460 V
Maximum transient current	40.7 A is suitable for 60 seconds
Frequency converter output frequency	0.5…200 Hz
speed range	1…10
speed and accuracy	+/-10% nominal slip distance 0.2 Tn to Tn
Local signal indication	1 LED (red) for live DC bus
output voltage	<=Power supply voltage
isolation	Electrical isolation between main power supply and control power supply
Cable type	Without installation kit: 1-wire IEC cable on... 45 ° C, copper 90 ° C/XLPE/EPR Without installation kit: 1-wire IEC cable on... 45 ° C, copper 70 ° C/PVC Comes with UL Class 1 kit: 3-wire UL 508 cable at 40 ° C, copper at 75 ° C/PVC
electrical connection	VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: 端子 2.5 mm² / AWG 14 L1/R, L2/S, L3/T: 端子 25 mm² / AWG 3
Tightening torque	0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) 4.5 N.m, 40 lb. 内部 (L1/R, L2/S, L3/T)
power supply	Internal power supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC+/-5%,<10 A, protection type: overload and short circuit protection Internal power supply: 24 V DC (21... 27 V),<200 A, protection type: overload and short circuit protection
During the sampling period	2 ms+/-0.5 ms F discrete 2 ms+/-0.5 ms R discrete 2 ms+/-0.5 ms RES Discrete 3.5 ms+/-0.5 ms VIA simulation 22 ms+/-0.5 ms VIB simulation
response time	FM 2 ms, Tolerance+/-0.5 ms suitable for analog output FLA, FLC 7 ms, Tolerance+/-0.5 ms suitable for discrete output FLB, FLC 7 ms, Tolerance+/-0.5 ms suitable for discrete output RY, RC 7 ms, Tolerance+/-0.5 ms suitable for discrete output
precision	+/-0.6% (VIA) for temperature fluctuations of 60 ° C +/-0.6% (VIB) for temperature fluctuations of 60 ° C +/-1% (FM) for temperature variation of 60 ° C
Linearity error	VIA: Maximum value+/-0.15% applicable input VIB: Maximum value+/-0.15% applicable input FM:+/-0.2% applicable output
Analog output model	FM can be configured with a voltage of 0... 10 V DC through a switch, impedance of 7620 Ω, and resolution of 10 bits FM can be configured with a current of 0... 20 mA through a switch, impedance of 970 Ω, and resolution of 10 bits
output mode	Configurable relay logic: (FLA, FLC) NO -100000 times Configurable relay logic: (FLB, FLC) NC -100000 times Configurable relay logic: (RY, RC) NO -100000 times
Minimum switch current [Imin]	3 mA on... 24 V DC compatible with configurable relay logic
Maximum switch current	5 A on... 250 V AC on... Resistive (load) load - cos phi=1- L/R=0 ms (FL, R) 5 A on... 30 V DC on... Resistive (load) load - cos phi=1- L/R=0 ms (FL, R) 2 A on... 250 V AC on... inductive load - cos phi=0.4- L/R=7 ms (FL, R) 2 A on... 30 V DC on... inductive load - cos phi=0.4- L/R=7 ms (FL, R)
Digital input type	F programmable 24V DC, with Level 1 PLC, impedance: 4700 Ω R programmable 24V DC, with Level 1 PLC, impedance: 4700 Ω RES programmable 24V DC, with Level 1 PLC, impedance: 4700 Ω
Discrete input logic	Positive logic (source) (F, R, RES),<=5 V (state 0),>=11 V (state 1) Negative logic (leakage) (F, R, RES),>=16 V (state 0),<=10 V (state 1)
insulation performance	Between 3535 V DC grounding and power supply terminals Between 5092 V DC control and power supply terminals
insulation resistance	>=1 m Ω 1 minute 500 V DC
frequency resolution	Display unit: 0.1 Hz Analog input: 0.024/50 Hz
communication service	The 'timeout' setting range is from 0.1 seconds to 100 seconds Read device identification (43) Monitoring can be prohibited Read hold register (03), up to 2 words Write multiple registers (16) with a maximum of 2 words Write single register (06)
tab	Communication card compatible with LonWorks
Power consumption W	603 W
airflow	214 m3/h
functionality	middle
Specific applications	HVAC
Variable speed drive application selection	Building HVAC compressor vortex Building HVAC fan Building HVAC pump
Motor power range AC-3	15... 25 kW on... 380... 440 V 3-phase 15... 25 kW on... 480... 500 V 3-phase
Motor starter type	frequency converter
Discrete output quantity	2
Number of analog inputs	2
Analog input type	VIA can be configured through a switch with a voltage range of 0... 10 V DC 24 V maximum, impedance of 30000 ohms, and a resolution of 10 bits VIB configurable voltage: 0... 10 V DC 24 V maximum, impedance: 30000 Ω, resolution 10 bits VIB configurable PTC thermal probes: 0... 6 probes, impedance: 1500 Ω VIA can be configured with a current of 0... 20 mA, impedance of 250 Ω, and resolution of 10 bits through a switch
Quantity of analog output	1
physical interface	2-wire RS485 system
Connector Type	1. Open ended 1 RJ45
transmission rate	9600 bps or 19200 bps
Transmission frame	RTU
Number of addresses	1…247
data format	8-bit, parity or no parity, 1 stop bit
polarization mode	No impedance
Asynchronous motor control configuration file	Voltage/frequency ratio, 5 points Voltage/frequency ratio Voltage/frequency ratio, 2 points Voltage/frequency ratio, automatic IR compensation (U/f+automatic Uo) Sensorless magnetic flux vector control standard
Torque accuracy	+/- 15 %
Instantaneous over torque	120% nominal motor torque+/-10% applicable for 60 seconds
Acceleration and deceleration tilting	Linear slope, adjustable separately, with a range of adjustment from 0.01 to 3200 seconds Automatic load processing
Motor slip compensation	Motor control with unavailable voltage/frequency ratio Automatically regardless of load conditions adjustable
switching frequency	6... 16 kHz adjustable 8... 16 kHz available
Rated switching frequency	8 kHz
Braking to stop	Adopting DC injection
grid frequency	47.5...63 Hz
Expected route Isc	22 kA
Protection type	Overheating protection: Drive Dissipative power: Drive Short circuit between motor phase lines: Drive Input phase failure: Drive Overcurrent between output phase line and ground: driving DC bus overvoltage: driver Braking on control circuit: Drive Prevent exceeding speed limit: Drive Bus power supply overvoltage and undervoltage: drive Bus power supply undervoltage: drive Prevent input phase loss: Drive Thermal protection: motor Motor phase failure: Motor PTC probe: motor
width	245 mm
height	330 mm
depth	190 mm
Net weight	11.50 kg

environment
pollution level	2. Complies with IEC 61800-5-1
IP protection level	IP20 does not have blind plates on the upper component cover in accordance with IEC 61800-5-1 IP20 does not have blind plates on the upper component cover in accordance with IEC 60529 IP21 complies with IEC 61800-5-1 IP21 complies with IEC 60529 IP41 complies with IEC 61800-5-1 for the upper components IP41 upper components comply with IEC 60529
Anti vibration	1.5 mm (f= 3…13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8
impact-resistant	15 gn is suitable for 11 ms and complies with IEC 60068-2-27
environmental characteristics	Level 3C1 conforming to IEC 60721-3-3 Class 3C2 conforming to IEC 60721-3-3
noise level	54 dB complies with 86/188/EEC
working altitude	1000... 3000 m is limited to 2000m, and the grid current for 'corner grounding' is reduced by 1%/100m =1000 meters without capacity reduction
relative humidity	5... 95% non condensing in accordance with IEC 60068-2-3 5... 95% drip free in accordance with IEC 60068-2-3
ambient temperature	-10... 40 ° C (without capacity reduction) 40... 50 ° C (available)
operating position	Vertical direction+/-10 °
Product Certification	CSA UL C-Tick NOM 117
identification	CE
meet the standard	IEC 61800-3 Environment 1 Security Level C1 IEC 61800-3 Environment 1 Security Level C2 IEC 61800-3 Environment 1 Security Level C3 EN 55011 Class A Group 1 IEC 61800-3 IEC 61800-3 Safety Level C3 EN 61800-3 Level C3 IEC 61800-3 Security Level C2 IEC 61800-5-1 UL Type 1 IEC 61800-3 Environment 2 Security Level C1 IEC 61800-3 Environment 2 Security Level C2 IEC 61800-3 Environment 2 Security Level C3
Assembly method	Equipped with heat sink
Electromagnetic Compatibility	Static discharge reactance interference level 3 conforming to IEC 61000-4-2 Radio frequency electromagnetic field radiation immunity test level 3 conforming to IEC 61000-4-3 Anti fast transient level 4 conforming to IEC 61000-4-4 1.2/50 and 8/20 µ s composite wave (test) level 3 conforming to IEC 61000-4-5 Conforming to IEC 61000-4-6 for Conducted Fluctuations Caused by Radio Frequency Fields Level 3 Voltage drop and open circuit suppression test conforming to IEC 61000-4-11
Adjust the circuit	PI monitoring
Storage environment temperature	-25…70 °C

packaging unit
Packaging 1: Type of packaging unit	PCE
Per kilogram	1
Packaging 1: Height	28.000 cm
Packaging 1: Width	40.000 cm
Packaging 1: Length	30.000 cm
package weight	11.586 kg
Packaging 2: Type of packaging unit	P06
Packaging 2: Number of packaging units	4
Packaging 2: Height	75.000 cm
Packaging 2: Width	60.000 cm
Packaging 2: Length	80.000 cm
Packaging 2: Gross weight	59.344 kg

Contract Warranty
Warranty (months)	18