Sanitary grade precision filter

Sanitary grade precision filterProduct Introduction:

The 3-core 20 inch precision filter has a processing capacity of 3 tons per hour. The precision filter is a new type of multifunctional filter, which consists of two parts: the filter and the filter element. It has been widely used in the purification of liquids such as water, oil, and ink, as well as solid-liquid separation in industries such as machinery, metallurgy, chemical engineering, textiles, printing and dyeing, electroplating, pharmaceuticals, and food. Mainly removes fine particles from water. The internal filter element includes polypropylene (PP) melt blown filter element, wire wound filter element, folding filter element, degreasing cotton filter element, activated carbon filter element, etc. Installing filters of different materials and precision inside can effectively remove various small impurities based on the filter aperture. The filter element consists of various types such as melt blown core, wire wound core, folded core, and sintered core.

The filtered liquid is pressurized through the inlet of the filter, passes through the filter element from the outside to the inside through the filter layer, and is filtered into a clear liquid, which is then discharged through the outlet. Impurities are trapped in the deep and surface layers of the filter element, thereby achieving the purpose of filtering the liquid.
1. Inlet of liquid to be filtered
2. Clear liquid discharge outlet
3. Drain port

Sanitary grade precision filtrationThe size, structure, and size of the filter element depend on the design flow rate and the characteristics of the medium used to filter the liquid. The material of HT filters is high-quality stainless steel with a reasonable structure. They are not only small in size, low in cost, and have a large flow rate, but also easy to maintain, replace, and assemble. The filtration accuracy is 0.11-100um, and the flow rate is 0.5-200m3/h. Products of different sizes and specifications can also be made according to user needs.

Side entry economical filter element, 3-core, filter element length of 20 inches, maximum working pressure of 0.6Mpa, inlet and outlet diameter of 1 "BSP inner thread interface, SUS304 material, clamp type locking device.

Side in and bottom out filter element filter, 5-core, filter element length of 40 inches, maximum working pressure of 0.6Mpa, inlet and outlet diameter of 2 "national standard flange, SUS304 material, bolt type locking device.

Micro porous filter is a new type of filtration equipment developed in recent years both domestically and internationally. It can filter out particles and bacteria above 0.1um in liquids and gases. It has the advantages of high filtration accuracy, fast transition speed, minimal adsorption, no medium detachment, acid and alkali corrosion resistance, and easy operation. It is now widely used as an essential equipment in industries such as pharmaceuticals, chemicals, electronics, beverages, fruit wine, biochemical water treatment, and environmental protection.
Filtration capacity T/H: 0.05-20
Filter usage pressure mpa: 0.1-0.6
Filter specifications: 1, 3, 5, 7, 9, 11, 13, 15 cores
Filter operating temperature ℃: 5-55

The microporous filter adopts imported technology and is manufactured according to FDA standards. The filter material is high-quality stainless steel (304/316L).
Its characteristics are small size, light weight, easy use, large filtration area, low blockage rate, fast filtration speed, no pollution, good thermal and chemical stability.
This filter can filter out the vast majority of particles, so it is widely used in precision filtration and sterilization processes.
The filter cartridge has 1 core, 3 cores, 5 cores, 7 cores, 9 cores, 11 cores, 13 cores, and 15 cores
The folding filter cartridge has lengths of 10, 20, 30, and 40
The filter material includes polypropylene, polytetrafluoroethylene, and acetate fiber
过滤孔径有： 0.1um 、 0.22um 、 1um 、 3um 、 5um 、 10um
Filter cartridges with hydrophobicity (suitable for gases) and hydrophilicity (suitable for liquids) can be selected according to needs.