Sanitary grade pneumatic ball valve

NegotiableUpdate on 05/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The "Shangyu" brand pneumatic sanitary ball valve produced by Yujin Company is composed of high-precision pneumatic actuators and quick installation ball valves. Also known as pneumatic quick installation ball valves, they have undergone precise inspection processes and strict quality management. The flow channel has been precision polished and sterilized, and a fully enclosed F4 seal is used, which has no dead corners and is easy to clean.

Product Details

Q681F Sanitary Pneumatic Ball Valve


(Overall straight through type)	(Split type clamp)

1、 Product Overview

Shanghai Yuhu Company produces pneumatic actuators and quick assembly ball valves. Also known as clamp type pneumatic ball valve. All have undergone precise inspection processes and strict quality management. The flow channels have undergone precision polishing and sterilization treatment, and are sealed with a fully enclosed F4 seal, which has no dead corners and is easy to clean. The valve body is made of refined stainless steel, and the inner wall of the flow channel is polished with 0.5um (240Grit) electronic polishing to keep the fluid unobstructed. The sealing surface is made of fully wrapped PTFE without dead corners, ensuring hygiene. Widely used in fields such as beer engineering, food engineering, chemical engineering, pharmaceutical engineering, biotechnology, and water treatment engineering.

2、 Main technical parameters

Nominal Diameter	15～102mm
Nominal pressure	PN1.0MPa
Valve shaft material	stainless steel
Valve body material	304/316/316L stainless steel
Spherical material	304/316/316L stainless steel
valve seat seal	PTFE
Temperature	PTFE≤180℃
connection method	Quick install, welded, threaded
Applicable Medium	Beer, wine, biotechnology, food, pharmaceuticals, beverages, etc
Characteristics	Safe and hygienic, well sealed, long service life

3、 Actuator parameters

Model of actuator	GT and AT series single and double acting pneumatic actuators
gas supply pressure	0.4～0.7MPa
air connection	G1/4'、G1/8'、G3/8'、G1/2'
ambient temperature	-30～+70℃
mode of action	Single acting actuator: gas closed type (B) - valve position open when gas is lost (FO); Pneumatic opening (K) - valve position closed when gas is lost (FC)
mode of action	Double acting actuator: gas closed type (B) - valve position maintenance during gas loss (FL); Pneumatic opening (K) - valve position maintenance during gas loss (FL)
Can be equipped with accessories	Positioner, solenoid valve, air filter pressure reducer, holding valve, travel switch, valve position transmitter, handwheel mechanism, etc

Adopting a new type of pneumatic actuator, with double acting and single acting (spring reset), gear rack transmission, safe and reliable; The large-diameter valve adopts a series of AW type pneumatic actuators with fork type transmission, with a reasonable structure and high output force, and is available in double acting and single acting types.

1. Gear type dual piston, with large output torque and small volume.

2. The cylinder is made of aluminum material, which is lightweight and aesthetically pleasing.

3. Manual operating mechanisms can be installed at the top and bottom.

4. The rack and pinion connection can adjust the opening angle and rated flow rate.

5. The actuator can be equipped with live signal feedback indicators and accessories to achieve automated operation.

6. The IS05211 standard connection provides convenience for the installation and replacement of products.

7. The adjustable screws at both ends provide a ± 4 ° adjustable range for standard products between 0 ° and 90 °. Ensure synchronization accuracy with internal threaded pneumatic ball valves.

4、 Product selection

(1) Valve body parameters: nominal diameter, working pressure, process medium, usage scenario, valve body material, and other series of parameters.

(2) Actuator parameters: actuator form, control mode, control signal (4-20mA, 1-5V), action mode (air open, air closed)

Please provide the above technical parameters in as much detail as possible to facilitate our company's operations and technical personnel to accurately select for you. If you have any questions You can call us and we will do our best to provide you with high-quality service!

Kind reminder: If you need detailed product information, please contact our technical department or sales department

Related names: Clamp type pneumatic ball valve, pneumatic ball valve for food use