Welcome Customer !

Membership

Help

Sampling Systems
Custom manufacturer

Main Products:

instrumentb2b>Products

Sampling Systems

  • E-mail

    info@samplingshop.cn

  • Phone

    17717973370

  • Address

    Room 612, Building 1, Lane 2742, Pudong Avenue, Pudong New Area, Shanghai

Contact Now

Sample of needle sampler for standard GL45 bottle of Sepsis

NegotiableUpdate on 01/04
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Fully imported ultra-high quality Sepsis GL45 standard bottle needle sampler Sampler stainless steel sampler supports customization, providing a competitive advantage! $r $nNGL is a needle sampler for standard GL45 bottles, designed specifically for liquid processes. Through a dual needle (sampling+exhaust) structure, sealing adaptation with GL45 bottle diaphragm, and multi specification (capacity 250-1000ml, sampling needle inner diameter 1.4-3.0mm) selection, it achieves no leakage, no harmful emissions, easy operation, and can be safely and efficiently applied to the sealing of GL45 bottles with diaphragm in chemical, pharmaceutical, food and other fields
Product Details

Fully imported ultra-high qualitySample of needle sampler for standard GL45 bottle of SepsisStainless steel samplers support customization, providing a competitive advantage!


application

  • Liquid sampler


benefit

  • No overflow

  • various sizes

  • Ensure that the process/vent is sealed with a diaphragm between the sample bottle and the sample bottle


feature

  • No emissions

  • Operator safety

  • Environmental protection

  • Easy to make and low maintenance cost

  • Seal the bottle during filling to prevent gas or liquid leakage

  • Needle assembly for sampling and venting

  • Suitable for standard GL-45 bottles with separators

1、 Core application scenario: Sealed sampling of liquid processes

NGL sampler designed specifically forStandard GL45 bottle neck container with septumDesign, core solution for the "sealing and leakage prevention" problem in liquid sampling, typical application scenarios include:

  1. Chemical/pharmaceutical liquid samplingSampling scenarios that require isolation from air/environment for volatile, easily contaminated, or corrosive liquids such as solvents, reagents, and pharmaceuticals;

  2. Food/Beverage IndustrySampling of liquids such as syrup, essential oils, fermentation broth, etc. that need to avoid microbial contamination or flavor loss;

  3. Laboratory/Industrial Production LineThe fixed-point sampling of small and medium-sized GL45 reagent bottles and storage tanks is particularly suitable for processes that require control of "gas/liquid leakage" (such as liquids containing easily oxidizable components).

2、 Core design of "safer+more efficient": dual guarantee from structure to operation

The safety and efficiency of NGL samplers are designed based on their product features and benefits, and require a combination of "dual needle structure+sealing adaptation". The specific logic is as follows:

1. Safety core: prevent leaks, protect personnel and the environment

Security risk points Solution for NGL Sampler Key Operating Points
Liquid leakage/splashing ① The GL45 bottle mouth is tightly sealed with a diaphragm, and there is no spillage (leakage) throughout the filling process; ② Dual needle design: "Sampling needle+exhaust needle" separated to avoid liquid splashing due to pressure difference During installation, it is necessary to ensure that the sampler is fully engaged with the GL45 bottle mouth and the diaphragm is not damaged (it is recommended to replace the diaphragm regularly)
Harmful gas emissions No emissions design, volatile liquid gas is directed out through an exhaust needle (which can be connected to a collection device) to prevent operators from inhaling or polluting the environment If the sampled liquid is prone to volatilization, a tail gas collection bag/pipe can be connected to the exhaust needle end without direct open discharge
Personnel operation risk No direct contact with liquids is required. Needles assembly is pre assembled to reduce the probability of hands coming into contact with corrosive/toxic liquids Wear protective gloves during operation to avoid accidental needle puncture (needles are of special specifications and cannot be replaced at will)

2. Efficient core: Simplify operations and adapt to different needs

Efficiency pain points Solution for NGL Sampler Key Operating Points
The sampling process is complex ① Easy operation: No need for complex tools, directly adapt to GL45 bottle mouth, complete disassembly and assembly within 1 minute; ② Low maintenance: No complex components, only regular cleaning of needles and inspection of seals are required Rinse the needle with clean water/corresponding solvent after sampling (to avoid residual blockage), without disassembling the entire device
Adaptability to different liquids Provide3 types of sampling needle inner diameters (1.4mm/2.0mm/3.0mm)+3 capacity adaptations (250ml/500ml/1000ml)According to the viscosity/sampling volume of the liquid, the following options can be selected: - Low viscosity liquids (such as water and solvents): choose a small inner diameter (1.4mm), control the flow rate to prevent splashing; -High viscosity liquids (such as syrup and oil): choose a large inner diameter (3.0mm) to avoid blockage and improve sampling speed Refer to "Part No" for selection: For example, for a 500ml GL45 bottle sample of high viscosity liquid, select NGL-500-30
Unstable sealing of sampling In terms of design, "forced sealing" is used to ensure the sealing and isolation of the "process end (liquid source) - exhaust end - sampling bottle" through the pressure contact between the sampler and the diaphragm, avoiding external pollution or internal component loss Before each use, check if the sealing ring of the sampler is intact. If it ages, it should be replaced in a timely manner (contact the brand for accessories)

3、 Standard operating procedures: maximize safety and efficiency

Following the following steps can fully leverage the advantages of NGL samplers and avoid risks caused by misoperation:

  1. Selection matchingSelect the corresponding model based on the GL45 bottle capacity (250/500/1000ml) and liquid viscosity (such as NGL-250-14 for 250ml low viscosity liquid);

  2. preprocessingEnsure that the diaphragm of GL45 bottle is undamaged, clean and dry, and the sampling needle is not blocked (can be blown through with compressed air or rinsed with solvent);

  3. install and fixAlign the interface of the NGL sampler with the GL45 bottle mouth, rotate it clockwise and tighten it to ensure a seamless fit between the sampler and the bottle mouth (without looseness);

  4. Connection processConnect one end of the "sampling needle" to a liquid source (such as a pipeline or reactor outlet), and connect one end of the "exhaust needle" to an exhaust/collection device as needed (if no collection is required, keep it clean and open);

  5. Sampling operationOpen the liquid source valve and control the flow rate (for high viscosity liquids, increase the flow rate appropriately, and for low viscosity liquids, slow down). After sampling is completed, close the valve first and then disconnect the sampling needle connection;

  6. post-processingDisassemble the sampler, clean the needle and sealing surface, seal the GL45 sampling bottle with a lid, and store the sampler in a dry and clean environment (to avoid rust on the needle).

4、 Additional protection: Compliance and after-sales support

  • complianceThe product is produced based on the brand's "ISO 9001:2015 certification", and its material and sealing performance meet the requirements of industrial/food grade sampling. It can be used in scenarios with high compliance requirements (such as pharmaceutical GMP sampling);


Fully imported ultra-high qualitySample of needle sampler for standard GL45 bottle of SepsisStainless steel samplers support customization, providing a competitive advantage!


Part Number
Volume cc
Sample needle inner diameter (ID) mm
operation
NGL-250-14
250
1.4
Add to Cart
NGL-250-20
250
2.0
Add to Cart
NGL-250-30
250
3.0
Add to Cart
NGL-500-14
500
1.4
Add to Cart
NGL-500-20
500
2.0
Add to Cart
NGL-500-30
500
3.0
Add to Cart
NGL-1000-14
1000
1.4
Add to Cart
NGL-1000-20
1000
2.0
Add to Cart
NGL-1000-30
1000
3.0
Add to Cart