Same day shipment and analysis of electronic balance by Ande

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

On the same day, the AND analysis electronic balance GH300 $r $nAC adapter (TB248) was shipped. Input: AC100V (+10%, -15%) 50Hz/60Hz, power consumption: approximately. 15VA (including AC adapter) $r $n is mainly used $r $n scale $r $n external dimensions (width) (millimeters) $r $n217 $r $n external dimensions (height) (millimeters) $r $n316 $r $n weight (grams) $r $n. eight point two

Product Details

Same day shipment and analysis of electronic balance by AndeGH300Same day shipment and analysis of electronic balance by AndeGH300

The weighing value can be sent to a PC (compatible with Windows 10) via Quick USB (GH-02, sold separately)
Gram, milligram, quantity,%, carat, milligram (pearl measurement unit) mode
The RS-232C interface (D-Sub9P male) is standard configuration, and the underfloor weighing bracket is standard configuration
Data memory function: Weighing value: maximum. 200, calibration result: maximum. fifty
GLP/GMP/GCP/ISO compatible output
Under floor weighing: comes standard with special accessories
Automatic calibration: Automatically calibrate using built-in weights based on temperature changes.
Automatic environment setting: Automatically adjust the response characteristics (stability) of the measurement display based on the usage environment (wind, vibration).
Interval memory mode: When only storing weighing values, up to 200 data points can be stored. The measured values can also be periodically stored in the data storage.
The built-in clock function allows for the output of measured values along with date and time.
In the specific gravity mode, the specific gravity (density) of a solid can be calculated based on its weight in air and liquid.
The RS-232C interface is a standard device for outputting balance weighing values and data.
The accompanying data communication software WinCT can easily communicate with Windows PC.

model	GH202	GH252	GH120	GH200	GH300
称重能力	51g/220g	101 grams/250 grams	120 grams	220 grams	320 grams
Minimum Display	0.01 milligrams/0.1 milligrams		0.1 milligrams
repetitiveness (Standard deviation)	0.02 milligrams/0.1 milligrams	0.03 milligrams/0.1 milligrams	0.1 milligrams		0.2 milligrams
linear	± 0.03 milligrams/± 0.2 milligrams	± 0.10mg/± 0.2mg	± 0.2 milligrams		± 0.3 milligrams
display mode	g. Mg, pcs (piece rate mode),%, ct (carats), mom (nanograms), specific gravity meter
Scale pan size /Material of scale pan	φ90mm / SUS316
Overall dimensions /Body weight	217 (width) x 442 (depth) x 316 (height) millimeters/approximately. 8.2 kilograms

*Rotate the foot to level the scale, allowing the bubble to enter the red circle on the level.

The ideal installation conditions are a stable environment of 20 ° C ± 2 ° C and a humidity of 45-60% RH.
Installed in a room with less dust.
Use a sturdy balance frame. (Shockproof tables and stone slabs are ideal choices.)
The corners of the room vibrate less than the center, making it very suitable for weighing.
Do not install the balance near air conditioning or other equipment.
Please install in a place away from direct sunlight.
Do not place the balance near magnetic equipment.
Rotate the feet to level the scale so that the bubble is within the red circle on the level.
Please power on for at least 1 hour before use. (AC adapter connected to power source)
Please also read the [Precautions] in the user manual.

Frequently Asked Questions

LB (Lb) display:

The voltage supplied to the balance is low (low battery level). Check if the correct communication adapter is used.
The communication adapter or power supply may also malfunction. If maintenance is required, please attach an AC adapter.

Error 1 displays:

The weighing value is unstable and cannot be displayed. Unable to perform operations such as "zero position display" and "calibration".
Please check around the plate. Improve the environment of the installation site (vibration, wind, etc.).
Pressing the CAL key will restore the weighing display to normal, but if the display remains unstable in this state, repair is required.

Error 7:

Built in weight error. The built-in weight addition/removal mechanism has malfunctioned. Please try again. If the problem persists, it may be due to issues with the motor, lifting cam, slit (spring), photointerrupter, etc., which require repair.