Salt spray corrosion test chamber for electronic components

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The salt spray corrosion test chamber for electronic components can simulate typical environmental conditions in nature at any time without being limited by time and season. Putting the product into an environmental simulation laboratory for environmental simulation testing, replacing the usage environment with a simulated environment, can save a lot of manpower and material resources, and save development costs. At the same time, environmental simulation testing is based on the product's usage environment conditions, controlling the product's usage conditions. The testing has an "acceleration" property, which can shorten the product's testing cycle.

Product Details

Salt spray corrosion test chamber for electronic components(Can be customized according to customer needs)

1. Design basis and guiding ideology

1.1 Based on the technical conditions, sample form, sample material, sample size, weight of heavy components, and other relevant technical requirements in the user's bidding document.

1.2 Design according to the national standards corresponding to the required equipment.

1.3 The structural design of the test chamber is reasonable, and the supporting products and functional components can adapt to long-term, stable, safe, and reliable production needs. It can meet user detection requirements, and is easy to use, operate, and maintain. It has a long service life, beautiful appearance, and a good user interface, making user operation and monitoring simpler and more intuitive.

1.4 The main components of the equipment are selected from high-quality products of the manufacturer to ensure the quality and performance of the entire machine. Key configurations and components are selected from imported or joint venture products to ensure the performance, stability, and normal service life of the equipment.

1.5 Adopt mature and reliable new technologies and processes to reduce energy consumption, save costs, and improve quality.

1.6 Electrical control production and installation shall comply with relevant national electrical installation standards, operate reliably, and pay attention to electrical protection and interlocking functions.

2. Form and scope of project undertaking

2.1 The design, production, procurement of components, installation, and commissioning work undertaken by the project shall be the responsibility of the contractor (supplier).

2.2 The common systems of the equipment (power supply, water source, etc.) are connected by the user to the designated location of the supplier, and the fire protection, lighting, ventilation, etc. of the workshop are also the responsibility of the user.

2.3 The civil foundation of the equipment shall be made by the user according to the requirements of the supplier.

3.Salt spray corrosion test chamber for electronic componentsDesign Execution Standards

3.1 GB/T10587-2006 Technical Conditions for Salt Spray Test Chamber (Our company is one of the main drafting units)

3.2 GJB150.11-86 Equipment Environmental Test Method Salt Spray Test

3.3 GB/T2423.17-2000 Basic Environmental Testing Procedures for Electrical and Electronic Products - Test Ka: Salt Spray Test Method

3.4 GB/T10125-1997 Artificial Atmosphere Corrosion Test Salt Spray Test

3.5 QC/T 732-2005 Test Method for Enhanced Corrosion of Passenger Cars

3.6 Meet the technical requirements for the static salt spray corrosion test procedure of a certain automobile company's body

3.7 Technology that meets the requirements of GMW 8738 "Corrosion Test Instructions for Test Sites" of a certain automobile company

4. Acceptance criteria:

GB/T5170.8-2008 Basic parameter calibration methods for environmental testing equipment for electrical and electronic products Salt spray testing equipment