SZTDS-100F Ultrasonic Flow Meter

Product Overview

The SZTDS-100F series fixed split type ultrasonic flowmeter is widely used for online flow measurement of various liquids in industrial sites. The host is divided into wall mounted standard type, wall mounted explosion-proof type, disk mounted type, and local display type. The sensors are divided into external attachment type, plug-in type, pipe section type, etc., to meet the different on-site usage needs of users.

Host technical parameters

Measurement accuracy: superior to1％，Repeatability is better than0.2%

Measurement cycle:500ms (2 times per second, 128 sets of data collected per cycle)

Working power supply:220VAC/8～36VDC (module 100F4 is 8)～36VDC)

Maximum flow rate:64m/s (flow velocity resolution 0.001m/s)

apparentDisplay: 2 × 10 Chinese character backlit LCD can display instantaneous flow rate, positive, negative, net cumulative flow rate, flow velocity, etc

fuckWork: 4 × 4 touch keyboard operation (100F3 is 2 × 8, model)block100F4 key lightly tapping keyboard settings)

Signal input:◇3-channel 4-20mA analog input with an accuracy of 0.1%, capable of inputting signals such as pressure, liquid level, temperature, etc

◇2-channel three wire PT100 platinum resistor

Signal output:◇1 isolated RS485 output

　　 ◇1 channel 4-20mA or 0-20mA output

◇1-channel isolated OCT (pulse width 6)～Programmable between 1000ms, default 200ms)

◇1 relay output (pulse width 200ms)

Data storage: optional built-in data storage（SD card can store time, instantaneous traffic, cumulative traffic, signal status, etc., and data can be imported into the computer through dedicated software (except for module 100F4 type)

Communication protocol:MODBUS protocol, M-BUS protocol, FUJI extension protocol, and compatible with communication protocols of similar products from other domestic manufacturers

Other functions:◇Before automatic memory512 days, first 128 months, first 10 years cumulative positive/negative/net traffic

◇Before automatic memory30 times of power on/off time and flow rate, and can achieve automatic or manual replenishment of flow rate, which can be read out through MODBUS protocol

◇Programmable batch (quantitative) controller with fault self diagnosis function

◇can pass throughThe code file sent via email is used to upgrade the software

Protection level: SensorIP68， Host IP65 (module 100F4 type is IP57)

Explosion proof grade:EXdⅡBT4 (100F2 type)

Technical parameters of external clamp sensor

Technical parameters of plug-in sensors