SWP-LED dual circuit digital display controller/light column display controller

NegotiableUpdate on 08/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

SWP-LED dual circuit digital display controller/light column display controller SWP-LED series digital display dual circuit controller/light column display controller adopts microprocessor for control calculation

Product Details

SWP-LED dual circuit digital display controller/light column display controller

The SWP-LED series digital display dual loop controller/light column display controller uses a microprocessor for control calculations.

The SWP-LED series dual circuit light column display controller integrates digital and analog instruments, and can perform digital display control (high brightness LED digital display) and relative analog display (light column display) on measurement signals such as temperature, pressure, liquid level, and speed, making the display of measurement values clearer and more intuitive.

1、 Main features

1. The SWP series dual circuit digital display controller/light column display controller can simultaneously measure and display two input signals, and the two input signals can have different division marks.

2. It can be equipped with two analog transmission outputs and relay alarm outputs, suitable for various testing and control scenarios.

2、 Instrument appearance and wiring diagram(The following is the basic wiring method, please refer to the random wiring diagram for special orders)

3、 SWP-LED series dual circuit digital display control instrument type chart

4、 SWP-LED series light column measurement display control instrument type chart

★ Input Type

★ To fully switch inputs, simply set the secondary parameters of the instrument to switch between multiple division marks. The division marks that can be input are as follows:

★Transmission output mode

★Communication method

★The selection code and instrument programming code are different for the same division number. Please pay attention when setting the instrument.

★Note: D423 can only generate two alarms, one for each channel.

★Model example:

SWP-D823-212－10/09-HL/HL-P-W

Measurement display shows that the communication method is RS232, one output is relay output, the second output is 4-20mA, one input is CU50, the second input is Pt100.1, one alarm is upper limit alarm, one alarm is lower limit alarm, the second alarm is upper limit alarm, the second alarm is lower limit alarm, DC24 power supply output, power supply is DC24V.

Browse: