SWP-LED digital display controller/light column display controller

NegotiableUpdate on 10/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

SWP-LED digital display controller/light column display controller SWP-LED series digital display controller/light column display controller adopts microprocessor for control operation, which can perform high-precision linear correction measurement on various nonlinear input signals

Product Details

SWP-LED digital display controller/light column display controller

The SWP-LED series digital display controller/light column display controller adopts a microprocessor for control operation, which can perform high-precision linear correction measurement on various nonlinear input signals.

The SWP-LED series light column display controller integrates digital and analog instruments, and can perform digital display control (high brightness LED digital display) and relative analog display (light column display) on measurement signals such as temperature, pressure, liquid level, and speed, making the display of measurement values clearer and more intuitive, and can choose dual light column display mode.

1、 Main features

By adopting a full signal input without jumper settings, each instrument can adapt to various indexing numbers through simple and quick parameter settings.

2、 Instrument appearance and wiring diagram(The following is the basic wiring, please refer to the random wiring diagram for special orders)

3、 SWP-LED series digital display control instrument type chart

4、 SWP-LED series light column measurement display control instrument type chart

★Note 1: The C80 and C90 series have a 0.8-inch LED display, the S80, C70, and C40 series have a 0.56-inch LED display, and the C10 series have a 0.32-inch LED display.

★Note 2: The four limit control or four limit alarm output is controlled by four relays, and users can modify internal parameters to set the desired control or alarm mode. (Four limit control/alarm is only available for T.C80, S80, and C90 series, 2H represents two upper limit control/alarm, 2L represents two lower limit control/alarm)

★ input type

★ To fully switch inputs, simply set the secondary parameters of the instrument to switch between multiple division marks. The division marks that can be input are as follows:

★Transmission output mode

★contact method

★Note 1: The C80 series has a 0.8-inch LED display, the C90, S80, C70, and C40 series have a 0.56-inch LED display, and the C10 series has a 0.32-inch LED display.

★The selection code and instrument programming code are different for the same division number. Please pay attention when setting the instrument.

★Note 3: C70 and C10 have no frequency signal input.

★Model example:

SWP-C803-21-08－HL-T

Measurement display, communication method is RS232, output method is relay output, input type is PT100, one alarm is upper limit alarm, and the second alarm is lower limit alarm, powered by AC90-260V.

browse