- Phone
-
Address
Entrepreneurship Building, No. 906 Meilong Avenue, Longhua New District
Shenzhen Kyoto Yuqi Electronics Co., Ltd
Entrepreneurship Building, No. 906 Meilong Avenue, Longhua New District
SUGIYAMA ring-shaped magnetic sensor from Japan
SUGIYAMA ring-shaped magnetic sensor from Japan
The SE-30 magnetic sensor is a circular magnetic sensor used to check the discharge of air blown from workpieces.
The protector connected to the sensor helps with detection.
It can also reliably detect products that pass slowly or quickly.
Use by connecting to the safety stop SS-636/636C.
The smallest detectable object is a metal with a diameter of 1 millimeter or more.
Even in areas exposed to engine oil, it can be detected
Seismic, oil resistant, and drip resistant structures
The SE-30 magnetic sensor is a circular magnetic sensor used to check the discharge of air blown from workpieces.
The protector connected to the sensor helps with detection.
It can also reliably detect products that pass slowly or quickly.
Use by connecting to the safety stop SS-636/636C.
The smallest detectable object is a metal with a diameter of 1 millimeter or more.
Even in areas exposed to engine oil, it can be detected
Seismic, oil resistant, and drip resistant structures
| Minimum detectable object | Metal with a diameter of 1mm or more | |
| Effective detection range | φ30mm | |
| Input polarity of error detection device | One surgery | |
| Output format and operation | Voltage output type NPN light shielding output ON (transistor ON) | |
| output current | 80mA (maximum incoming current) | |
| response time | Less than 1ms | |
| power supply voltage | DC12V±10% | |
| Current consumption | Below 40mA | |
| Sensitivity adjustment | Continuously variable volume | |
| weight | 2.0 kilograms | |
| ambient temperature | 0~+55 ℃ without freezing or condensation | |
| ambient humidity | 35-85% RH without condensation | |