SK-1 type rapid mixer (vortex mixer)

OneSK-1 type rapid mixerIntroduction:

SK-1Type rapid mixerIt is an ideal and practical tool for laboratory technicians in colleges and universities, environmental protection, scientific research, health, epidemic prevention, petroleum, metallurgy, chemical, grain and other units.

IISK-1 type rapid mixercharacteristic:

SK-1Type rapid mixerIt mainly provides an ideal tool for experiments with large chemical reactions, few solutions, uniform solution speed, and can only be used for test tubes, colorimetric tubes, and small triangular flasks. This instrument not only solves the problem that cannot be solved by stirrers, but also saves a lot of research time. At the same time, the use effect is both fast and accurate.

IIISK-1 type rapid mixerPerformance:

1. Power supply: 220V ± 10% 50Hz
2. Power: 40W
3. Frequency: 3000rpm
4. Method: Spinning
5. Amplitude: 5mm

4SK-1 type rapid mixerusage method:

When usedSK-1 type rapid mixerPlease check if the random accessories are complete, including one power cord (power plug) and one rubber sponge. Then plug in the plug connected to the instrument, turn on the power switch, and the power indicator light will turn on, indicating that the device is working. During work, the uniformity of the solution in the test tube varies depending on the pressure on your hands. It is recommended to use no more than 1/2 of the solution in the test tube and colorimetric tube. When there is a large amount of uniform solution, please use a triangular flask. To ensure safety, please turn off the power at the end of use.

FiveSK-1 type rapid mixermatters needing attention:

To ensure safety, please ground the device when using it.
2. The instrument should be kept clean and dry, and solutions are strictly prohibited from entering the machine to avoid damaging the components.