SIMCO FMX-003 Electrostatic Tester

NegotiableUpdate on 11/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Detailed introduction of SIMCOFMX-003 Introduction: The electrostatic field tester is a non-contact handheld electrostatic field tester

Product Details

Detailed Introduction

SIMCO FMX-003Introduction

The electrostatic field tester is a non-contact handheld electrostatic field tester. The measurable range is+/-20KV(The working distance is1inch，25mm)Configuration has2aLEDEnsure that the lamp stays away from the object being measured during measurement25mmThe shell is made of anti-static material and has a grounding buckle to ensure reliable measurement results.

The tester is also equipped with an ion balance measuring plate that can be paired for testing±200VPeriodic verification of ion balance within the range.

It is mainly used to measure the electrostatic properties of textile raw materials and finished products (including fibers, yarns, fabrics, carpets, decorative fabrics) under laboratory conditions, and can also be used to measure the electrostatic properties of other sheet and plate materials such as paper, rubber, plastic, composite panels, etc. The instrument host consists of a corona discharge device, a probe, and a detection system. Using a given high-voltage electric field, discharge the test sample at regular intervals to induce static electricity in the sample, thereby detecting the magnitude of static electricity, the half-life of static voltage, and the residual amount of static electricity to determine the static performance of the test sample.

SIMCO FMX-003Instructions for using the electrostatic field tester product

Single press reset to zero

Single press display lock

Idle automatic shutdown

Battery efficiency display

Function: Effective detectionESDWorkplace equipment, workbenches, and tools are charged with static electricity.

Features: LCD/Level display detection data, test data retention, digital reset display, high/Low range.

Output: RedLCDDisplay positive charge, blue colorLCDDisplay negative charge

precision:Low range accuracy is: positive or negative0.1kvHigh range accuracy: positive or negative1kv

Input voltage:9V，6F22 Nickel battery

Measurable electrostatic field:+/-(0.00-20.0kV)(Automatic display adjustment)

Standard distance measurement:25mm+/-1mm

Ionic equilibrium can be measured:+/-(0-200V)

Measuring distance based on:ESD－STM3.1-2000Ion balance standard

LCDDisplay updates:per second5time

reaction time:1second

Working temperature and humidity:10-40 deg C/RH:0-60%R

graphic display:Positive: Red/Negative: Blue

Sound alarm:power on/Idle automatic shutdown/Beyond the measurable range

Auto Shutdown:Idle contract5minute

Measurement mode switching

Static electric field: single pressPowerThe key has a beep sound

Ion balance(Please install the ion balance measurement board first)Press simultaneouslyZeroandPower,There are two beeps

SIMCO FMX-003Product Parameters

Measurement range	Measurement of Charged Potential:0～±1.49kV(Loeffective distance)The±1.0kV～±20.0kV(Hieffective distance) Ionic equilibrium determination:0 ～±200 V
Measure distance	25mm±0.5(When measuring the distance and charged potential of the object being measured)
Response speed	1Within seconds
Sampling and investigation speed	5return/second
Measurement accuracy	±10%(Indicator value)
Operable environment	10℃～40℃The60%RHbelow
express	wide LCDRepresenting (digital numerical values andvagueObstacle Area Representation
Obstacle area representation	Voltage and subsidies Right half (positive side) red displayLCD(Attached with power supply)ONtime5Second timer function) Left half (reduced aspect) blue displayLCD
Regarding the division of the stick Resolution (bar)1A)	・±0.1kV (Loeffective distance) ・±1.5kV (Hieffective distance) ・±15V(During ion balance measurement)
Digital numerical representation	3Position represents automatic effective distance conversion (when measuring charged potential) □.□□kV⇒0.0～±1.49kV (Loeffective distance) □□.□kV⇒±1.0 kV～±20.0kV (Hieffective distance) □□□V⇒0 ～±200V(During ion balance measurement)
Various ways express	Text or illustration representation [IB]Ion balance determination method [HOLD]: Controller action representation [A.OFF]When indicating the automatic power stop function [Err]: indicates the numerical value representation when the sensor malfunctions
Buzzing sound	According to power operation, etcPThe buzzing of bees
Automatic power off	about5The automatic power-off function is used for different types of power supply power supplyONAt that timePOWERPress the button3If it lasts for more than a second, this skill can be stopped Can (the battery can be continuously measured until consumption)
handle	Push during measurementHOLDIn terms of buttons, numerical valuesvagueFixed obstacle area If pushed back to normal measurement again
Digital Number Display0	If the numerical value is within the allowable range of the action and the number is zero, press "ZEROThe button In terms of numerical values andvagueObstacle area becomes zero
LEDlighting	AttachedLEDLighting can also be used to read data in the dark. According to the power supplyONAt that timePOWERThe length of the button time can be selected to turn off or turn on the light
power supply	9Vdry cell(006P)1this Maximum action time: approximately30divide
Dimensions of appearance	115mm(L) x73mm(W) x25mm(H): No anode ion balance 123mm(L) x73mm(W) x25mm(H): Attached anode ion balance
weight	about140g(When conducting live testing, including batteries) about170g(When measuring ion balance, battery and anode ion balance)
material	electrical conductivityABSresin
accessory	Ion balanced anode, dedicated ground wire(1m)Thesoft caseBattery