SDL series high and low temperature (humid heat) test chamber

Chongqing Experimental Equipment Co., Ltd. (hereinafter referred to as the Company) is located in the Economic Development Park of the Northern New Area of Chongqing, known as the "Chongqing Pudong", adjacent to the third largest bonded zone in inland China. Here, the environment is beautiful, transportation is convenient, and numerous enterprises are gathered, providing excellent geographical and environmental conditions for production enterprises.

The company is currently a key enterprise in China's production environment testing and reliability testing equipment, specializing in the design and manufacture of climate environment testing equipment and laboratory instruments. The high and low temperature wet heat test chamber mainly produced by the company is suitable for inspecting various performance indicators of aerospace products, information electronic instruments and meters, materials, electrical and electronic products, and various electronic components in high temperature, low temperature or wet heat environments.

Precautions for using high and low temperature humid heat test chamber:

1. During the experiment, please do not open the box door unless necessary, as it may lead to a series of adverse consequences.
2. Before doing low-temperature work, the studio should be dried dry and dried at 60 ℃ for 1 hour.
3. Prohibit testing explosive, flammable, and highly corrosive substances.
4. If the heating test sample is placed inside the box, please use an external power supply for the test sample power control, and do not directly use the local power supply. When placing high-temperature samples for low-temperature testing, attention should be paid to keeping the opening time of the box door as short as possible.
5. Circuit breakers, over temperature protectors, provide safety protection for local test products and operators, so please check regularly.
6. Avoid shutting down and restarting the refrigeration unit within three minutes.
7. The lighting should be turned off at all times except when necessary.
8. Please note that this device must be safely grounded to prevent static electricity induction.
9. On any section perpendicular to the prevailing wind direction, the sum of the cross-sectional areas of the test load should not exceed one-third of the working section at that location.
10. When conducting high temperature tests, do not turn on the refrigeration unit when the temperature exceeds 55 ℃.

SDL series high and low temperature (humid heat) test chamber product description:

SDL series high and low temperature (humid heat) test chamber technical specifications: